Become a Site Supporter and Never see Ads again!

Author Topic: Black Lion Audio Auteur Preamp  (Read 2427 times)

0 Members and 1 Guest are viewing this topic.

Offline sunjan

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2004
  • Gender: Male
  • Taping since 1988, 28 years of fine recordings...
    • Just a handful of stuff I put on etree
Black Lion Audio Auteur Preamp
« on: January 23, 2011, 04:24:35 PM »
Stumbled over this.
IIUC Black Lion are know for modding MOTU and Digidesign gear.

24 VDC makes it difficult to power in the field. Is anyone familiar with it?
http://www.blacklionaudio.com/content.php?p=1

Mics: A-51s LE, CK 930, Line Audo CM3, AT853Rx (hc,c,sc),  ECM 121, ECM 909A
Pres: Tinybox, CA-9100, UA5 wmod
Recorders: M10, H116 (CF mod), H340, NJB3
Gearbag: High Sierra Corkscrew
MD transfers: MZ-RH1. Tape transfers: Nak DR-1
Photo rig: Nikon D70, 18-70mm/3.5-4.5, SB-800

Offline DLay

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 257
  • Gender: Male
  • If it has to be loud to be good, it isn't
Re: Black Lion Audio Auteur Preamp
« Reply #1 on: January 23, 2011, 11:18:46 PM »
Im not familiar with the pre mentioned and I havnt dealt with them personally, but I did have a friend from college get his Digi 002 mod'd by these guys and there was definitely a great difference. They swapped some capacitors and components, new pres, and new AD DA converters apparently. Though it was an expensive move, you could certainly argue its worth- the pres really did sound great and hardly hissed till they were near full open. Of course now with Pro Tools 9, Digi made it so you are no longer forced to use their garbage hardware to run Pro Tools so I cant imagine they see too many mod request now a days.
Beyerdynamic MC930 > Sound Devices 702t

Offline ArchivalAudio

  • Trade Count: (19)
  • Needs to get out more...
  • *****
  • Posts: 2883
  • Gender: Male
  • Team Milab | TeamVW:2011 Touareg TDI
Re: Black Lion Audio Auteur Preamp
« Reply #2 on: January 24, 2011, 02:55:17 AM »
That's 24VAC, even trickier . . .

that's what I thought I remembered when I looked into these 3 or so years ago...
you could do 24vdc in the field but 24vAC- good luck   ::)
~ Archival Audio ~
Archiving Worthy Music
since 1986 & digitally since 1995

https://www.facebook.com/ArchivalAudio/

Main Mics: Milab VM-44 Links • Milab DC-196's (Matched  Pair)  • MBHO KA500 or KA300 • Line Audio CM3's
PreAmps:  Naiant LittleBox • Naiant [Milab VM44] TinyBox • Naiant PIPsqueak
Recorders: MixPre 10T •  Tascam DR-100 mkIII • Sony M-10 

macMini 3Ghz i7 16GB Ram 500GB SSD • MOTU UltraLite
Naiant MSH-2's •   TOA K1's • Beyer TG 153c's •  AT 853 (4.7kmod darktrain) • Countryman B3's (1 k mod)  + other assorted mics

 

RSS | Mobile
Page created in 0.032 seconds with 44 queries.
© 2002-2020 Taperssection.com
Powered by SMF