Become a Site Supporter and Never see Ads again!

Author Topic: Some general questions on the Oade M248  (Read 4829 times)

0 Members and 1 Guest are viewing this topic.

Offline F.O.Bean

  • Is a 4 channel slut and
  • Trade Count: (125)
  • Needs to get out more...
  • *****
  • Posts: 40663
  • Gender: Male
  • Taperus Maximus
Re: Some general questions on the Oade M248
« Reply #15 on: May 03, 2011, 12:04:10 AM »
Definitely set the M10 to it's unity gain setting (~6) and crank the M248 up as much as needed.

So for sure, the M10's "unity gain" is DEF at 6 on the record wheel ??? I was wondering where to run it at. I have been running it at 2>4 on the rec wheel. So yinz dont think running it at 6 will result in more noise from the M10 ???

Sorry for the thread highjack, but Ive been wondering that since I got it, because I dont want to push my LB too too hard :(
not from my test
i ran white noise from my stereo to the m10 and found that 4 was unity
i also found that each number is approx 2-3 db plus or minus depending on the direction you go

+T thank you very much for that info on the unity gain ;)
Recording Rigs:
Schoeps MK4's & MK41's ->
Schoeps | NBob 250/0 KCY's ->
Naiant +60v/Low Noise PFA's ->
DarkTrain Right Angle Stubby XLR's ->
Sound Devices MixPre-6 & MixPre-3 ->
SanDisk 128gb Extreme Pro & 2x 64gb Ultra Plus

Portable Playback Rigs:
Campfire Audio Andromeda & Dorado | Westone (2nd Generation) UM Pro 30 IEM's ->
Linum G2 SuperBax & Bax |  2x CA/ALO SPC Litz | Sony MUC-M2BT1 LDAC MMCX Cables ->
Shanling M5s & M0 | Sony NW-A35 DAP's

DAW:
Dell Inspiron 5570-5521 SLV Laptop
(Pentium i5 Processor/8gb RAM/256gb SSD)

http://www.archive.org/bookmarks/diskobean | http://www.archive.org/bookmarks/Bean420 | http://bt.etree.org/mytorrents.php

Offline it-goes-to-eleven

  • Trade Count: (58)
  • Needs to get out more...
  • *****
  • Posts: 6702
Re: Some general questions on the Oade M248
« Reply #16 on: May 03, 2011, 10:09:07 AM »
+T thank you very much for that info on the unity gain ;)

Has anyone made a faq for that thing yet?

New product - Get your NEUMANN active mounting bars
Active microphone mounting bars for Schoeps and AKG, and Naiant AKG, ready to ship

Offline F.O.Bean

  • Is a 4 channel slut and
  • Trade Count: (125)
  • Needs to get out more...
  • *****
  • Posts: 40663
  • Gender: Male
  • Taperus Maximus
Re: Some general questions on the Oade M248
« Reply #17 on: May 03, 2011, 07:49:35 PM »
+T thank you very much for that info on the unity gain ;)

Has anyone made a faq for that thing yet?


Doubtful
Recording Rigs:
Schoeps MK4's & MK41's ->
Schoeps | NBob 250/0 KCY's ->
Naiant +60v/Low Noise PFA's ->
DarkTrain Right Angle Stubby XLR's ->
Sound Devices MixPre-6 & MixPre-3 ->
SanDisk 128gb Extreme Pro & 2x 64gb Ultra Plus

Portable Playback Rigs:
Campfire Audio Andromeda & Dorado | Westone (2nd Generation) UM Pro 30 IEM's ->
Linum G2 SuperBax & Bax |  2x CA/ALO SPC Litz | Sony MUC-M2BT1 LDAC MMCX Cables ->
Shanling M5s & M0 | Sony NW-A35 DAP's

DAW:
Dell Inspiron 5570-5521 SLV Laptop
(Pentium i5 Processor/8gb RAM/256gb SSD)

http://www.archive.org/bookmarks/diskobean | http://www.archive.org/bookmarks/Bean420 | http://bt.etree.org/mytorrents.php

 

RSS | Mobile
Page created in 0.092 seconds with 30 queries.
© 2002-2018 Taperssection.com
Powered by SMF