Become a Site Supporter and Never see Ads again!

Author Topic: AT853 and Phantom  (Read 1221 times)

0 Members and 1 Guest are viewing this topic.

Offline pridix

  • Trade Count: (3)
  • Taperssection Newbie
  • *
  • Posts: 47
  • Gender: Male
  • Ground control to Major Tom
AT853 and Phantom
« on: January 13, 2012, 01:03:21 PM »
Hi everyone:

I'm new in the forum and in the tapers world... I have been listening to bootlegs for years and  I think I should start to tape by myself.

Anyway, here is the question:

1.I have just bought a Tascam DR40 recorder. This recorder comes with Phantom in the XLR and also in the 1/4 jack. As far as I know...the Phantom gives 48v, isn't? I'm also close to buy a pair of AT853 with 1/8 jack and I don't know which voltage they need...Will the work taking just the required voltage from the Phantom or I'll probably damage them if they need less voltage.

2. If I have another pair of microphones which needs between 2-10v and I use the Phantom I'll damage them?

The two question can be summarize in the next: If I have a recorder with 48v Phantom, can I use with it every microphone which needs 48v or less without damage them? If I have Phantom I'll also need battery box or something like that?

Thank you so much...

Daniel
« Last Edit: January 13, 2012, 01:59:34 PM by pridix »
It's not a secret at all, Achtung ya'll

Mics: MM-HSLO (4,7k mod) , AT853(853-O, 853-H, 853-C, UE-C)
Cables: Naiant PFA, Hosa ATT-448
Recorders: Tascam DR-40
Playing Stuff: Onkyo (TX7630 & TX18), Magnat System 400, Tannoy Mercury M2, Mission M35

 

RSS | Mobile
Page created in 0.107 seconds with 28 queries.
© 2002-2019 Taperssection.com
Powered by SMF