Since I'll be receiving it (presumably) in the next week or so, it's time for the "proper usage" discussion.
Countryman B3 Omni (4.7K sensitivity modded) > CA-UGLY II > Line In > R-09HR. I usually record 24 bit/44.1.
Based on my scanning other threads, it looks like I should set the R-09HR at "unity gain" of 38-40, and set the preamp gain appropriately for the concert setting, then use the gain control on the R-09HR for minor adjustments if needed. My inclination would be to set it the preamp so that peaks never get past -10 or so, and then add the rest in post.
I had a different preamp, where it was recommended that I set the R-09HR at MAXIMUM gain and use the preamp to set the levels, so I'm a little confused. I trust the assembled experience of the experts here for the proper answer.
So here we go... all opinions are welcome!