Become a Site Supporter and Never see Ads again!

Author Topic: Powering a Tascam DR100?  (Read 1441 times)

0 Members and 1 Guest are viewing this topic.

Offline coloartist

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2062
  • MGoldey -"you can shove those mics up your ass
Powering a Tascam DR100?
« on: September 03, 2013, 07:40:20 PM »
A friend has a DR100 and he wants to run external power. It says 5v on the plug on the side of the deck. That is usb voltage. Can I give him a Walmart lithium to run it. I have 9v versions. Is that too much voltage for the DR100? I can't find specs in the manual.

Teds list says this Tascam DR100mkii / 5v/ Size B, 4.00mm OD × 1.70mm ID / Center pin (+)  Ring (-) / Normal Polarity

Just not sure how strict the 5v is.
« Last Edit: September 03, 2013, 07:45:49 PM by coloartist »
mk4>Kwon/din a/din>kc5>cmc6>kindkables XLR>788T
Canon XH-A1 Sony AX100                       
Samsung Backlit LED 55">Pioneer Elite SC-27>Snell Acoustics E.5  Series


  • Guest
  • Trade Count: (0)
Re: Powering a Tascam DR100?
« Reply #1 on: September 03, 2013, 08:58:04 PM »
Fwiw, I've used 7.2v on the dr100mkii without issues.


RSS | Mobile
Page created in 0.045 seconds with 44 queries.
© 2002-2020
Powered by SMF