Become a Site Supporter and Never see Ads again!

Author Topic: BOSE Acoustic Wave battery  (Read 2537 times)

0 Members and 1 Guest are viewing this topic.

Offline supo

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 14
BOSE Acoustic Wave battery
« on: November 17, 2013, 04:07:36 PM »
I have a Bose Acoustic Wave and the battery that I bought for it is a 12V 8000mha.  It has an weird connector to get the power from the battery to the unit - but, my question is....can I get a custom cable made that will operate my Apogee Mini Me and my Tascam HD-P2?  Will that still send 12v to both the Mini Me and the HD-P2 or is the voltage split in half or other issue?  Thanks.

Offline tgakidis

  • Trade Count: (541)
  • Needs to get out more...
  • *****
  • Posts: 5672
  • Gender: Male
    • My Recordings on the Archive:
Re: BOSE Acoustic Wave battery
« Reply #1 on: November 17, 2013, 04:11:11 PM »
If split the battery will still supply 12v.
GAKables: Custom XLR, Digi & Batt Cables http://taperssection.com/index.php?topic=133186.0

Mics: Telefunken RFT AR-51 / Telefunken ELA M 260 (tk60,tk61,tk62) / Telefunken M60 / AKG c426b / AKG c414 xls / AKG c414 B-XLS / AKG c460b (ck61,ck62,ck63,ck69,a60,ck1,ck22,ck3,ck8,Blue B6) / nBob AKG Actives>PFA/ nBob AKG Actives>nBox Platinum / Naiant AKG Actives>PFA / AT853 w/ 4.7k Mod (Card,Omni,Sub)
Pre-Amps: Sonosax SX-M2 / Lunatec V3
Recs: Sound Devices MixPre-10T / Sound Devices MixPre-6 / Sony PCM-M10 / Roland R-07

My Recordings: https://archive.org/search.php?query=taper%3A%28Gakidis%29&sort=-date

Offline supo

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 14
Re: BOSE Acoustic Wave battery
« Reply #2 on: November 17, 2013, 04:18:06 PM »
That's so awesome.  So, how long can I run the Mini Me and HD-P2 for on a full battery.  It's an Nimh battery - does that mean anything?  Like, it's dead right now, no charge.  I've only used it once.  How do I care for it so that it runs properly. 

Offline tgakidis

  • Trade Count: (541)
  • Needs to get out more...
  • *****
  • Posts: 5672
  • Gender: Male
    • My Recordings on the Archive:
Re: BOSE Acoustic Wave battery
« Reply #3 on: November 17, 2013, 05:28:26 PM »
I am no good a figuring out run time, I can only tell you you can split the battery.
GAKables: Custom XLR, Digi & Batt Cables http://taperssection.com/index.php?topic=133186.0

Mics: Telefunken RFT AR-51 / Telefunken ELA M 260 (tk60,tk61,tk62) / Telefunken M60 / AKG c426b / AKG c414 xls / AKG c414 B-XLS / AKG c460b (ck61,ck62,ck63,ck69,a60,ck1,ck22,ck3,ck8,Blue B6) / nBob AKG Actives>PFA/ nBob AKG Actives>nBox Platinum / Naiant AKG Actives>PFA / AT853 w/ 4.7k Mod (Card,Omni,Sub)
Pre-Amps: Sonosax SX-M2 / Lunatec V3
Recs: Sound Devices MixPre-10T / Sound Devices MixPre-6 / Sony PCM-M10 / Roland R-07

My Recordings: https://archive.org/search.php?query=taper%3A%28Gakidis%29&sort=-date

kirk97132

  • Guest
  • Trade Count: (0)
Re: BOSE Acoustic Wave battery
« Reply #4 on: November 22, 2013, 03:38:05 PM »
That's so awesome.  So, how long can I run the Mini Me and HD-P2 for on a full battery.  It's an Nimh battery - does that mean anything?  Like, it's dead right now, no charge.  I've only used it once.  How do I care for it so that it runs properly.
IF you want a truly accurate time, then do a run time test yourself.  Even with formula I would only trust that to be 80% accurate and then battery condition comes into play.  Brand new is not the same as say two years old.  So, of you really want to know do it yourself and them you KNOW for sure. 

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40691
  • Gender: Male
  • Taperus Maximus
Re: BOSE Acoustic Wave battery
« Reply #5 on: December 07, 2013, 01:59:09 AM »
That battery NEEDS "broken in"!!! I have a Powerex AA/AAA charger thats actually has a "break in" option. BUT, if you dont have that option with your charger, If I were you, Id cycle that battery AT LEAST 5 times to do your own "break in" ;) A "cycle" is when you charge, then discharge the battery. Do that 5 times and THEN run battery runtimes ;)
Recording Gear:
Schoeps MK 4 (MP) & MK 41v (MP) Capsules ->
Schoeps 250/0 KCY's X2 ->
Naiant +60v/Low Noise PFA's x2 ->
DarkTrain Right Angle Stubby XLR's x3 ->
Sound Devices MixPre-6 & MixPre-3 ->
SanDisk 128gb Extreme Pro & 64gb Ultra Plus SDXC-I

Portable Playback Gear:
Campfire Audio Andromeda & Dorado IEM's ->
Linum G2 SuperBax & Bax {3.5mm} | FiiO LC 2.5c {2.5mm} ->
Shanling Audio M5s | Sony NW-A35 DAP's

DAW:
Dell Inspiron 15 5570-5521 Laptop
(Pentium i5/8gb RAM/256gb SSD)

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline Chuck

  • Trade Count: (42)
  • Needs to get out more...
  • *****
  • Posts: 10741
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re: BOSE Acoustic Wave battery
« Reply #6 on: December 15, 2013, 03:51:10 PM »
That's so awesome.  So, how long can I run the Mini Me and HD-P2 for on a full battery.  It's an Nimh battery - does that mean anything?  Like, it's dead right now, no charge.  I've only used it once.  How do I care for it so that it runs properly.
IF you want a truly accurate time, then do a run time test yourself.  Even with formula I would only trust that to be 80% accurate and then battery condition comes into play.  Brand new is not the same as say two years old.  So, of you really want to know do it yourself and them you KNOW for sure.

This is good advice.
Reality is merely an illusion, albeit a very persistent one.

Microphones: Microtech Gefell M300, AKG C 480 B comb-ULS/ CK 61/ CK 63, Sennheiser MKE 2 elements, CAD GXL1200 (cardioid and mod-cardioid capsule & electronics mod), Audix M1290-o, Micro capsule active cables w/ Naiant PFA's, Naiant MSH-1O, Naiant AKG Active cables, Church CA-11 (cardioid), (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlebox, Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Sound Devices MixPre-6, Tascam DR-680, iRiver iHP-120 (Rockboxed & RTC mod)

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

 

RSS | Mobile
Page created in 0.091 seconds with 49 queries.
© 2002-2019 Taperssection.com
Powered by SMF