Become a Site Supporter and Never see Ads again!

Author Topic: Mini-Me Gain Structure  (Read 1686 times)

0 Members and 1 Guest are viewing this topic.

Offline rodeen

  • Trade Count: (33)
  • Taperssection All-Star
  • ****
  • Posts: 1432
  • Gender: Male
  • Harmonica Man!
Mini-Me Gain Structure
« on: May 06, 2014, 08:57:09 PM »
Quick question for all you current or past Mini-Me owners, am I correct in understanding that for loud, PA recordings that we do, the Mini-Me needs to be opened up and jumpers set to the low gain structure setting?

TIA!
"It's never too late to have a happy childhood!"
[LMA]: http://archive.org/search.php?query=taper%3A%22odeen%22&sort=-date

Offline hi and lo

  • Trade Count: (38)
  • Needs to get out more...
  • *****
  • Posts: 2314
Re: Mini-Me Gain Structure
« Reply #1 on: May 06, 2014, 09:05:50 PM »
Yes, you should absolutely set the gain structure to low via the internal jumpers. There's a good post on here somewhere about the jumper positions. IIRC, the manual isn't very clear about the which position is which.

Offline rodeen

  • Trade Count: (33)
  • Taperssection All-Star
  • ****
  • Posts: 1432
  • Gender: Male
  • Harmonica Man!
Re: Mini-Me Gain Structure
« Reply #2 on: May 06, 2014, 09:14:33 PM »
Thanks!  I thought it was most likely discussed here sometime in the past but I wasn't having much luck with using google to search TS.com or the builtin search.
And you are right, the manual is pretty light on everything.  Thanks again!
"It's never too late to have a happy childhood!"
[LMA]: http://archive.org/search.php?query=taper%3A%22odeen%22&sort=-date

Offline Cobiwan

  • Trade Count: (21)
  • Taperssection Member
  • ***
  • Posts: 966
  • Gender: Male
Re: Mini-Me Gain Structure
« Reply #3 on: May 24, 2014, 04:51:50 PM »
check your manual, it shows a pic of where they are located. Factory preset is to high or forward toward the front panel. You need to get some tweezers and pull them straight up and then move them back towards the rear of the mini me. Very easy
"Without music, life would be a mistake."
Friedrich Nietzsche

Mics:
2 matched pairs of Oktava MK-012 MSP6 with Bill Sitler mod + cardioid, hyper-cardioid, and omni capsules
Church Audio CA-14 omni/UBB
Sonic Studios DSM-6S
Recorders:
Tascam HD-P2, Tascam DR-680, Zoom F-8
Cables:
Gakables XLR, S/PDIF, battery and umbrella, DigiGal AES > S/PDIF, Darktrain hot swap battery

Member of DiGiHoArDeRs

 

RSS | Mobile
Page created in 0.112 seconds with 31 queries.
© 2002-2019 Taperssection.com
Powered by SMF