Become a Site Supporter and Never see Ads again!

Author Topic: Nakamichi CM-300  (Read 2641 times)

0 Members and 1 Guest are viewing this topic.

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (27)
  • Needs to get out more...
  • *****
  • Posts: 18625
  • Gender: Male

Offline Jerseyboy

  • Trade Count: (2)
  • Taperssection Newbie
  • *
  • Posts: 46
Re: Nakamichi CM-300
« Reply #1 on: January 15, 2017, 06:50:53 PM »
Brian

Thanks for this pdf.

I picked up a 3-pak with cp-1 & cp-2 caps in the box in mint condition.
Now, I'm looking for someone to do the Datsunzgarage mod.

jb

Offline Fried Chicken Boy

  • Trade Count: (8)
  • Needs to get out more...
  • *****
  • Posts: 2769
Re: Nakamichi CM-300
« Reply #2 on: January 17, 2017, 02:22:33 PM »
Thanks for the link, Brian.

Hi Jerseyboy, don't know if you saw this short thread on the Datsunzgarage mod. > http://taperssection.com/index.php?topic=175683.0
Before doing any modifications, maybe record with your CM-300s out in the field a few times, see how they sound to you, and decide if they even need a mod.  You might be pleasantly surprised? 

Offline Hypnocracy

  • Site Supporter
  • Trade Count: (38)
  • Taperssection All-Star
  • *
  • Posts: 1763
  • Hypnocratic Missionary
    • Hypno on teh LMA
Re: Nakamichi CM-300
« Reply #3 on: January 25, 2017, 07:09:34 AM »

Now, I'm looking for someone to do the Datsunzgarage mod.

jb

Not sure what that mod is about...but walstib62 has been the resident Nak Mod Man for a while...he did a chop and Phantom Mod that sounded real nice to my ears on a Teac Clone ME-80 set I had...
_____________
hypno on teh Archive

This must be heaven -- This is where the rainbow ends. At last it's the real thing...At least I can pretend.

Mic's: Gefell SMS2000 M20 & M21 - Nbob Gefell Active Collet/Naiant PFA - AT853 Omni - Milab VM-44 Links Cardioid - Naiant AKG Active/CK63 Hypercardioid
Preamp's; Grace V2, Aerco MP-2, Neve Portico 5012
Deck's: Tascam DR-2d - Fostex FR2-LE Busman Tmod - Tascam DR-680
Mothballed- Nak CM100-CP1, Sony D8, D3 (DAT), D5, Sanyo Xacti ICR-XPS01M, Denecke AD-20 & SonicPort

Offline Fried Chicken Boy

  • Trade Count: (8)
  • Needs to get out more...
  • *****
  • Posts: 2769
Re: Nakamichi CM-300
« Reply #4 on: January 25, 2017, 03:32:07 PM »
^  The Datsunzgarage mod [http://datsunzgarage.com/nak/] is a circuit modification that changes out resistors and capacitors to, supposedly, improve the sound and reduce noise of the Nak CM-300.  I can't comment on that one way or another, and I have no skin in the game, but a few of our resident circuit builders/electronics guys (Jon @ Naiant, hi and lo) were a little dubious.  The mod doesn't change the mic's appearance or the need to use a battery. 

Offline down2earthlandscaper

  • Multiple-Rig Maniac
  • Site Supporter
  • Trade Count: (23)
  • Taperssection Member
  • *
  • Posts: 424
  • Gender: Male
Re: Nakamichi CM-300
« Reply #5 on: January 30, 2017, 03:45:57 AM »
Thanks for the link, Brian.

Hi Jerseyboy, don't know if you saw this short thread on the Datsunzgarage mod. > http://taperssection.com/index.php?topic=175683.0
Before doing any modifications, maybe record with your CM-300s out in the field a few times, see how they sound to you, and decide if they even need a mod.  You might be pleasantly surprised?

Agreed. Try them first. I have Nak 300's, Tascam PE-120 Clones, and CM700's. All sound great to me without modification, but I have enough of these mic bodies now now that I'm going for a Sank P48 mod on a pair so I can run my shotguns without batteries. Spyder9 has a pair of CM-1000's with the Sank P48 mod and speaks highly of them
Mics: CA-14(cards & omnis) and CA-11(cards & omnis) ; AT853's(cards, hypers, mini shotguns); Busman BSC-1 (cards, hypers, omnis)
Nakamichi CM300's (CP-1,2,3,4) Nakamichi CM700's (cards, omnis)
Tascam PE-120's (cards, omnis) Peluso CEMC-6 (cards and subcards)
DPA 4061's DPA 4022's
Preamps: CA-9100; Naiant Tinybox (12v/48v + PIP 8V); Naiant Littlebox;
DPA MPS6030; Sound Device Mix Pre-D
Decks: Sony PCM M10; Edirol R-4; Zoom H6; Marantz PMD-661; Sound Devices 722

Online lsd2525

  • Trade Count: (8)
  • Taperssection All-Star
  • ****
  • Posts: 1035
  • Gender: Male
Re: Nakamichi CM-300
« Reply #6 on: February 03, 2017, 10:32:28 AM »
That set is too nice to butcher up. IMO, grab a set that has some miles on them if you want to mod, and keep those as-is. Again, just my opinion. I was this close to pulling the trigger when I saw that post go up in the YS. Doh!!
Mics: ADK A51s; AT4041; Superlux S502; CK91 active w/homebrew BB; AT853; Naiant X-X; Nak 300's
Recorders: M10; DR-60D; DR-70D

Offline down2earthlandscaper

  • Multiple-Rig Maniac
  • Site Supporter
  • Trade Count: (23)
  • Taperssection Member
  • *
  • Posts: 424
  • Gender: Male
Re: Nakamichi CM-300
« Reply #7 on: February 14, 2017, 03:23:19 AM »
Ok, I'm just going to say that after the first few shows last week with the Sank Phantom Power Modification, that these cm300's are the shit now! No more batteries and most importantly they sound freaking amazing.

https://archive.org/details/dso2017-02-11.cp4.flac24
Mics: CA-14(cards & omnis) and CA-11(cards & omnis) ; AT853's(cards, hypers, mini shotguns); Busman BSC-1 (cards, hypers, omnis)
Nakamichi CM300's (CP-1,2,3,4) Nakamichi CM700's (cards, omnis)
Tascam PE-120's (cards, omnis) Peluso CEMC-6 (cards and subcards)
DPA 4061's DPA 4022's
Preamps: CA-9100; Naiant Tinybox (12v/48v + PIP 8V); Naiant Littlebox;
DPA MPS6030; Sound Device Mix Pre-D
Decks: Sony PCM M10; Edirol R-4; Zoom H6; Marantz PMD-661; Sound Devices 722

Offline boa

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 433
  • Gender: Male
  • crowesbase loves you
    • crowesbase
Re: Nakamichi CM-300
« Reply #8 on: February 16, 2017, 06:52:45 PM »
Ok, I'm just going to say that after the first few shows last week with the Sank Phantom Power Modification, that these cm300's are the shit now! No more batteries and most importantly they sound freaking amazing.

https://archive.org/details/dso2017-02-11.cp4.flac24

How do think they compare sound wise to your 700's?
« Last Edit: February 16, 2017, 06:55:39 PM by boa »
"Did anyone else just see a gnome with two bottles of scotch walk by?"

Offline down2earthlandscaper

  • Multiple-Rig Maniac
  • Site Supporter
  • Trade Count: (23)
  • Taperssection Member
  • *
  • Posts: 424
  • Gender: Male
Re: Nakamichi CM-300
« Reply #9 on: February 18, 2017, 10:05:47 PM »
Pretty sweet. I haven't gotten into the 700 source yet, but I ran it on the same stand so it should be interesting to listen to the two side by side. I'll keep you posted.
Mics: CA-14(cards & omnis) and CA-11(cards & omnis) ; AT853's(cards, hypers, mini shotguns); Busman BSC-1 (cards, hypers, omnis)
Nakamichi CM300's (CP-1,2,3,4) Nakamichi CM700's (cards, omnis)
Tascam PE-120's (cards, omnis) Peluso CEMC-6 (cards and subcards)
DPA 4061's DPA 4022's
Preamps: CA-9100; Naiant Tinybox (12v/48v + PIP 8V); Naiant Littlebox;
DPA MPS6030; Sound Device Mix Pre-D
Decks: Sony PCM M10; Edirol R-4; Zoom H6; Marantz PMD-661; Sound Devices 722

 

RSS | Mobile
Page created in 0.191 seconds with 38 queries.
© 2002-2017 Taperssection.com
Powered by SMF
Website Design by Foxtrot Media, Inc., a Baltimore Website Company