Become a Site Supporter and Never see Ads again!

Author Topic: AD2K Power options  (Read 936 times)

0 Members and 1 Guest are viewing this topic.

Offline tapjunkie

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 210
AD2K Power options
« on: June 07, 2019, 07:44:00 PM »
My Tekkeon batteries have decided to stop sending 12 volts to the AD2K.  No matter what I do, it will not power the unit and when it does go to "12" volt, it automatically switched to the lowest voltage.  Does anyone have a suggestion how to fix this, or offer another battery option?  Any help will be appreciated.

Thanks

Offline jerryfreak

  • Trade Count: (29)
  • Needs to get out more...
  • *****
  • Posts: 3342
  • team WOOz
Re: AD2K Power options
« Reply #1 on: June 07, 2019, 09:03:23 PM »
not sure how servicable those are. is there a setting above 12V?
team schoeps, dpa, benchmark, and zoom mostly... subject to change without warning

Offline tapjunkie

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 210
Re: AD2K Power options
« Reply #2 on: June 08, 2019, 06:11:24 PM »
Yes, I believe there is one or two higher voltages above 12.

Offline jerryfreak

  • Trade Count: (29)
  • Needs to get out more...
  • *****
  • Posts: 3342
  • team WOOz
Re: AD2K Power options
« Reply #3 on: June 08, 2019, 08:00:21 PM »
i think it can take up to 18V

team schoeps, dpa, benchmark, and zoom mostly... subject to change without warning

Offline audBall

  • Trade Count: (36)
  • Needs to get out more...
  • Posts: 6030
  • Gender: Male
  • Stella (World Rally) Blue
Re: AD2K Power options
« Reply #4 on: June 08, 2019, 08:47:01 PM »
mg m21|nbob.pfa; dpa smk-sc4061
akg.ck61,62,63;77(c577)|naiant.pfa 
lunatec v2; dpa mma-a d:vice, -6000
edirol r44(ocm); sony pcm-m10, -d100

Offline fanofjam

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 310
Re: AD2K Power options
« Reply #5 on: June 10, 2019, 07:25:36 PM »
One or more of the individual cells inside your tekkeon battery has bit the dust.  Which tekkeon model is it?  If it's the 3300, those are really simple to refurbish with new 18650 cells and make it as good as or better than new.  If it's the 3450, those are a PITA to refurb.

Offline tapjunkie

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 210
Re: AD2K Power options
« Reply #6 on: June 13, 2019, 08:01:33 PM »
Thanks for the tips everyone!

 

RSS | Mobile
Page created in 0.093 seconds with 49 queries.
© 2002-2020 Taperssection.com
Powered by SMF