Become a Site Supporter and Never see Ads again!

Author Topic: talentcell locking connector/rocker bypass mod  (Read 1001 times)

0 Members and 1 Guest are viewing this topic.

Online jerryfreak

  • Trade Count: (26)
  • Needs to get out more...
  • *****
  • Posts: 2712
  • I'm a llama! (taboot)
in:
small: MK4/4V > CMR > V3 or J.Williams Mod MicMan Jr or no pre at all >AD2K/R07/PCM-A10/Oade Warm 661/DR100-MKIII

smaller: 4061/4099 CORE or 4011/4018V> d:vice MMA



out:
home:Benchmark DAC1 HDR > Dynaudio BM15A active monitors
shop: Musical Fidelity VLink 192 Asynchronyous> coax> DAC1 > Rokit RP8 active monitors

Offline adrianf74

  • Trade Count: (10)
  • Taperssection Member
  • ***
  • Posts: 459
  • Gender: Male
Re: talentcell locking connector/rocker bypass mod
« Reply #1 on: June 18, 2019, 03:34:52 PM »
i thought this was clever. save your ass.

https://wavreport.com/2017/11/29/batteries-part-2-diy-modding-the-talentcell-12v-lithium-battery/

Thanks for the share.  My buddy (who just upgraded from old DVD batteries that were way past their prime) and I were talking about this exact situation.  I'm not comfortable with doing the soldering but know some people where I work who might be able to help out.
Mics: AKG ck63-ULS > nBob Actives, Line Audio CM3 | Decks: [A10 or R-07 TBD], Zoom F4 |Power: Baby nBox, Talentcell 12V 6000mAh Rechargeable Battery

Offline adrianf74

  • Trade Count: (10)
  • Taperssection Member
  • ***
  • Posts: 459
  • Gender: Male
Re: talentcell locking connector/rocker bypass mod
« Reply #2 on: June 18, 2019, 10:39:58 PM »
Read further down in the comments and in later 2018, people were stating the clearance is no longer there near the usb "port." Guess I'll need to open mine up to look.
Mics: AKG ck63-ULS > nBob Actives, Line Audio CM3 | Decks: [A10 or R-07 TBD], Zoom F4 |Power: Baby nBox, Talentcell 12V 6000mAh Rechargeable Battery

Offline rippleish20

  • Trade Count: (21)
  • Taperssection Member
  • ***
  • Posts: 956
Re: talentcell locking connector/rocker bypass mod
« Reply #3 on: June 19, 2019, 07:58:41 AM »
I did this hack to one of mine but I put the connector out the side of the case. It was too tight a fit doing the way its shown
Schoeps CMC6 (MK22's) / AKG C480B (ck61, ck63, ck8) / DPA (4061) / Neumann KM100 (AK40, AK50) / Audio Technica AT4050ST/ AT853s  (cardiod, omni) / CA-14 (cardiod) / CA-11 (Omni) /
Mixpre-10t / Mixpre-6 / Mixpre-3 /Roland R-07 /Tascam DR-100mkIII / d:vice

Offline EmRR

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 330
    • ElectroMagnetic Radiation Recorders
Re: talentcell locking connector/rocker bypass mod
« Reply #4 on: June 19, 2019, 10:00:57 AM »
That's my comment at the bottom about the new PCB and what looks possible.  Haven't done it to mine, but looks pretty easy. 
Mics: DPA 4060 w/MPS 6030 PSU/DAD6001/DAD4099, Neumann KM 131, KMR 81i, Oktava MK 012, Sennheiser MKH 105, MKH 20, MKH 30, MKH 40, MKH 800 TWIN, lots of other studio appropriate choices
Recorders: Zoom F8n, Sony MZ-R50, portable MOTU based multitrack DAW for client work

 

RSS | Mobile
Page created in 0.077 seconds with 47 queries.
© 2002-2019 Taperssection.com
Powered by SMF