0 Members and 1 Guest are viewing this topic.
Quote from: dactylus on July 20, 2016, 11:40:10 AM^I have not tried the regular 1/8" Techflex. The proprietary Milab connectors on one end of the cable might be an issue there. I need to investigate this and quit talking about it. Sorry I'm late to this thread...Not being a fan of 'wrappable' techflex, I think the best solution here would be .25 Techflex Petco (Techflex PTN0.25) (see Hypnocracy's post above). The MiLab connectors are not proprietary. They are Binder 719 connectors (Part # 09 9789 71 05) and easily removed / resoldered. The pinout / color code is below and any of the community cable makers or savvy DIY'ers should be able to do this work. It's small connector that requires better than average soldering skills, but definitely doable.1 white w/ blue strips2 blue w/ white strips3 solid blue4 ground5 solid whiteEven better is that you can then splice in mini-xlrs (or other suitable connector) to make an extension cable. There's nothing worse than having to literally tape the microphone bodies to a 10+ foot stand. I made a nice spliced set for JFCB who can attest to this. You could also make a Binder 719 extension cable, but adding even more of those connectors to the signal chain is risky with their IP40 rating. Definitely the weakest link in the MiLab design.
^I have not tried the regular 1/8" Techflex. The proprietary Milab connectors on one end of the cable might be an issue there. I need to investigate this and quit talking about it.
^^ What hi and lo said. Now that my traveling and visits from relatives have stopped for a little while, I need to get off my ass and post pictures of the setup.
^^ What hi and lo said. He put together not only a beautiful cable set for my Links, but a killer preamp as well. Now that my traveling and visits from relatives have stopped for a little while, I need to get off my ass and post pictures of the setup.
It isn't fear. It isn't subjective. You can measure it on a scope.
Good catch, neither of these are the correct part. The female is 4-pin and the 5-pin male lacks the strain relief. I'm in my mobile, otherwise I would link to the correct parts.
MobilePage created in 0.196 seconds with 37 queries.© 2002-2017 Taperssection.com
Powered by SMF
Website Design by Foxtrot Media, Inc., a Baltimore Website Company
SMF 2.0.7 |
SMF © 2014, Simple Machines