Become a Site Supporter and Never see Ads again!

Author Topic: V2 Battery Options  (Read 7073 times)

0 Members and 1 Guest are viewing this topic.

Offline kindms

  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 4696
    • The Breakfast
Re: V2 Battery Options
« Reply #45 on: May 13, 2018, 08:17:46 AM »
The maxoak $99 deal is up again on amazon.

However, if all you need to do is power your V2, the talentcell battery linked below will more than do the trick at a fraction of the price.


https://www.amazon.com/gp/aw/d/B00ME3ZH7C/ref=mp_s_a_1_1?ie=UTF8&qid=1523462156&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=talentcell&dpPl=1&dpID=41gbnCwsodL&ref=plSrch

supposed to be another lightening deal at 345PM today
AKG414 XLS/ST, AKG ck61, ck22, >nBob colettes >PFA > V3, SD MixPre >  TCM-Mod Tascam HDP2, Sony M10
Little Bear tube Pre >Outlaw Audio 2200 Monoblocks > VR-2's

Offline kindms

  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 4696
    • The Breakfast
Re: V2 Battery Options
« Reply #46 on: May 14, 2018, 06:20:25 PM »
540pm tomorrow says is another lightening deal fwiw
AKG414 XLS/ST, AKG ck61, ck22, >nBob colettes >PFA > V3, SD MixPre >  TCM-Mod Tascam HDP2, Sony M10
Little Bear tube Pre >Outlaw Audio 2200 Monoblocks > VR-2's

Offline lsd2525

  • Trade Count: (12)
  • Needs to get out more...
  • *****
  • Posts: 2142
  • Gender: Male
  • Eschew obfuscation
Re: V2 Battery Options
« Reply #47 on: May 16, 2018, 01:28:45 PM »
Anyone know an easy/effective way to knock the 12v output down to 9v on this thing? Some sort of adapter?
Mics: ADK A51s; AT4041; Line CM3; Superlux S502; CK91 active w/homebrew BB; AT853; Naiant X-X; Nak 300's
Recorders: M10; DR-60D; DR-70D

Offline jerryfreak

  • Trade Count: (12)
  • Taperssection All-Star
  • ****
  • Posts: 1804
  • I'm a llama! (taboot)
Re: V2 Battery Options
« Reply #48 on: June 11, 2018, 09:40:58 AM »
i have a 7.4V liion i bought for the mytek that is laying around

2 batts and a charger

Offline kindms

  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 4696
    • The Breakfast
Re: V2 Battery Options
« Reply #49 on: June 11, 2018, 04:56:50 PM »
If anyone cares I was doing a time test on my V3 running the maxoak. So AKG414XLS/ST over the years I have found these mics to be POWER HUNGRY when run with the V3. So after about 5 hours of 414 >V3>COAX > the Maxoak dropped 1 light.

I bought 2 of those batteries. 1 to run the preamp and 1 to run the HDP2. the HDP@ never lost a light during the same timed session.
AKG414 XLS/ST, AKG ck61, ck22, >nBob colettes >PFA > V3, SD MixPre >  TCM-Mod Tascam HDP2, Sony M10
Little Bear tube Pre >Outlaw Audio 2200 Monoblocks > VR-2's

 

RSS | Mobile
Page created in 0.116 seconds with 32 queries.
© 2002-2018 Taperssection.com
Powered by SMF