Become a Site Supporter and Never see Ads again!

Author Topic: AT853 phantom power  (Read 2542 times)

0 Members and 1 Guest are viewing this topic.

Offline lsd2525

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2233
  • Gender: Male
  • Eschew obfuscation
Re: AT853 phantom power
« Reply #15 on: January 14, 2019, 09:38:29 AM »
Hey lsd2525, it's been a bit since you posted abut this, but did you ever figure out the at8505 power modules?  I just got a couple and tried them with u853 mics and didn't get any signal aside from popping when I changed the switch position (while using phantom power).  I have other AT power modules I can compare pin voltage against but thought I'd see if you had the easy answer first.  Thanks.

No, I pretty much threw them in a box and forgot about them. I should probably pull them out and have another go
Mics: KM184's; ADK A51s; AT4041; Line CM3; Superlux S502; CK91 active w/homebrew BB; AT853; Naiant X-X; Nak 300's
Recorders: M10; DR-60D; DR-70D

Offline Twenty8

  • Trade Count: (1)
  • Taperssection Newbie
  • *
  • Posts: 39
  • Just a newb building his first rigs
Re: AT853 phantom power
« Reply #16 on: January 14, 2019, 04:26:27 PM »
I am also hoping for some more details on the AT8505.

Saturday, I bought a pair of AT853s on ebay and they come with a pair of AT8505s.  The price was remarkable and I had to pull the trigger.  I noticed that the connectors off the mics are probably mini XLR.  Those power supplies look huge though, just too big really.

Wondering:
1.  Can I ditch the AT8505s for a set of AT8531s?  Anyone familiar with this method?  They are the original AT853 model.
2.  Can I use AT8538s instead?

Fingers crossed they are subcard caps.  Wouldn't care if they were cards though, the set was $55.
With mini XLR they would be a great choice to do a 4.7k mod.
I figure it was a win in some category yet to be seen pending arrival.

Offline lsd2525

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2233
  • Gender: Male
  • Eschew obfuscation
Re: AT853 phantom power
« Reply #17 on: January 14, 2019, 04:41:01 PM »
I am also hoping for some more details on the AT8505.

Saturday, I bought a pair of AT853s on ebay and they come with a pair of AT8505s.  The price was remarkable and I had to pull the trigger.  I noticed that the connectors off the mics are probably mini XLR.  Those power supplies look huge though, just too big really.

Wondering:
1.  Can I ditch the AT8505s for a set of AT8531s?  Anyone familiar with this method?  They are the original AT853 model.
2.  Can I use AT8538s instead?

Fingers crossed they are subcard caps.  Wouldn't care if they were cards though, the set was $55.

I use the AT8531 all the time. All you need is a 2x female XLR>1/8 cable. And yes, if unmolested the connectors off the mics is mini XLR
With mini XLR they would be a great choice to do a 4.7k mod.
I figure it was a win in some category yet to be seen pending arrival.
Mics: KM184's; ADK A51s; AT4041; Line CM3; Superlux S502; CK91 active w/homebrew BB; AT853; Naiant X-X; Nak 300's
Recorders: M10; DR-60D; DR-70D

Offline Twenty8

  • Trade Count: (1)
  • Taperssection Newbie
  • *
  • Posts: 39
  • Just a newb building his first rigs
Re: AT853 phantom power
« Reply #18 on: January 15, 2019, 08:48:49 PM »
Thanks for the info.
I figured as much.
Those AT8505s look a lot bigger than their replacement AT8538s.

 

RSS | Mobile
Page created in 0.133 seconds with 32 queries.
© 2002-2019 Taperssection.com
Powered by SMF