Become a Site Supporter and Never see Ads again!

Author Topic: ISO Church Audio Mic Bar....  (Read 2813 times)

0 Members and 1 Guest are viewing this topic.

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 12810
  • Gender: Male
Re: ISO Church Audio Mic Bar....
« Reply #15 on: February 19, 2018, 08:45:50 PM »
Same reason paper pulp remains one of the best materials for speaker cones.
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<<

Offline nak700s

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 614
  • Gender: Male
Re: ISO Church Audio Mic Bar....
« Reply #16 on: February 23, 2018, 01:28:15 PM »
Same reason paper pulp remains one of the best materials for speaker cones.

Yup, it absorbs all vibrations and essentially isolates the microphones...which is important with these little suckas since they are soldered to alligator clips.  I will often gaff-tape a coaster to a beam and clip the CA-14's to them while running an extension cable down to a deck...they work wonders.
Normal: Nakamichi CM-700's >> SD 744T (or) Sony PCM-M10
Normal: Crown CM-700's >> SD 302 >> SD 744T
Fun times: 3 Crown CM-700's >> SD 302 >> SD744T + 2 Nakamichi CM-700's >> SD744T
Stealth: CA-14c >> CA 9200 >> Edirol R-09HR
Ultra stealth: AudioReality >> AudioReality battery box >> Edirol R-09HR
Simple & Sweet!

Offline kdig

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 4
Re: ISO Church Audio Mic Bar....
« Reply #17 on: December 28, 2018, 05:39:46 PM »
FYI: SRS makes XY mounts for CA-11's and DIN mounts for CA-11/14's now.

They cost a bit more than bar coasters, though.

Link: https://www.shapeways.com/shops/srsrecordingservices?section=Church+Audio&s=0
« Last Edit: December 28, 2018, 05:44:02 PM by kdig »

Offline Papaphunk

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 328
Re: ISO Church Audio Mic Bar....
« Reply #18 on: January 08, 2019, 08:59:36 AM »
FYI: SRS makes XY mounts for CA-11's and DIN mounts for CA-11/14's now.

They cost a bit more than bar coasters, though.

Link: https://www.shapeways.com/shops/srsrecordingservices?section=Church+Audio&s=0

Thanks, this will be perfect.
****************************************************
CA-14 Card Mic's - CA-11 Omni's - Rode M5 Mic's - Superlux s502
CA 9200 PreAmps - CA UBB
Busman MOD Tascam DR-70D - TASCAM DR-100MKII 
****************************************************

Recordings on archive: https://archive.org/details/@papaphunk

 

RSS | Mobile
Page created in 0.108 seconds with 32 queries.
© 2002-2019 Taperssection.com
Powered by SMF