Become a Site Supporter and Never see Ads again!

Author Topic: External power for Littlebox  (Read 1127 times)

0 Members and 1 Guest are viewing this topic.

Offline ts

  • Trade Count: (58)
  • Needs to get out more...
  • *****
  • Posts: 2950
  • Gender: Male
External power for Littlebox
« on: February 06, 2018, 09:21:03 PM »
My version 1 Littlebox has an external power port. I’m going to have Ted make me a cable for it. Would like to use with batteries with USB A output. Any problems with this? Specifically this one:

https://www.anker.com/store/PowerCore-13000/A1215011

Thanks.


Offline willndmb

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 6649
  • Gender: Male
Re: External power for Littlebox
« Reply #1 on: February 06, 2018, 09:25:47 PM »
I have only used RC batteries and the cable Jon made me but I have Anker batteries for other things and they work fine.
Same with Rav
Mics - AKG ck61/ck63 (c480b & Naiant actives), SP-BMC-2
XLR Cables - Silver Path w/Darktrain stubbies
Interconnect Cables - Dogstar (XLR), Darktrain (RCA > 1/8) (1/8 > 1/8), and Kind Kables (1/8f > 1/4)
Preamps - Naiant Littlebox & Tinybox
Recorders - PCM-M10 & DR-60D

Offline spyder9

  • Trade Count: (63)
  • Needs to get out more...
  • *****
  • Posts: 12423
  • Gender: Male
  • "Are you Zman?"
    • My Archived shows
Re: External power for Littlebox
« Reply #2 on: February 14, 2018, 11:41:28 AM »
I have a Littlebox V1 w/ the external jack.  I had Ted make me 3 different battery cables for the following bats:  9.6V RC, 9V DVD, and Tekkeon set at 9v.

That said, the 5V output won't cut it.  You need to discuss with Jon about possible modification to your LB.

 

     

Offline ts

  • Trade Count: (58)
  • Needs to get out more...
  • *****
  • Posts: 2950
  • Gender: Male
Re: External power for Littlebox
« Reply #3 on: February 14, 2018, 06:59:02 PM »
I have a Littlebox V1 w/ the external jack.  I had Ted make me 3 different battery cables for the following bats:  9.6V RC, 9V DVD, and Tekkeon set at 9v.

That said, the 5V output won't cut it.  You need to discuss with Jon about possible modification to your LB.

 

   

Ted’s spec sheet gives a range of 5V - 16V for operating power. Unless the Version 1 is different?

 

RSS | Mobile
Page created in 0.146 seconds with 32 queries.
© 2002-2018 Taperssection.com
Powered by SMF