Become a Site Supporter and Never see Ads again!

Author Topic: ROCK / METAL loud live recording  (Read 2731 times)

0 Members and 1 Guest are viewing this topic.

Offline earmonger

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 593
  • 20-20000 Hz
Re: ROCK / METAL loud live recording
« Reply #15 on: February 25, 2018, 09:53:17 PM »
You may not need a new recorder--just a battery module to deal with the hot signal.

If you are trying to record mics directly into Mic-in, that could be your problem. At metal volumes, the mics themselves can overload--and I expect that most internal mics would as well. Then mic-in goes through an internal pre-amp that amplifies the signal more, another chance to overload.

An attenuator cuts down the signal after it comes out of the mic, which makes things easier for the Mic-in preamp. But if the mic has already overloaded for lack of power, it can't fix that.

I record most amplified music, including metal, with mics (CA-11) into a 12-volt BATTERY MODULE into Line-In. Extra power from the module to the mics lets them handle louder sounds. And there's no preamp behind Line-in., but the battery module supplies enough power to get a nice clear signal recorded. 

Read the Soundpros page for the CMC-4 and it talks about power options. https://www.soundprofessionals.com/cgi-bin/gold/item/SP-CMC-4U  The SoundPros SP-SPSB-10 is probably fine, or use their online chat to doublecheck what would work best with your mics and recorder.





« Last Edit: February 25, 2018, 10:11:27 PM by earmonger »

 

RSS | Mobile
Page created in 0.108 seconds with 29 queries.
© 2002-2018 Taperssection.com
Powered by SMF