Become a Site Supporter and Never see Ads again!

Author Topic: Diginoise with Schoeps MK41s  (Read 1101 times)

0 Members and 1 Guest are viewing this topic.

Offline crazylegs

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 1
Diginoise with Schoeps MK41s
« on: May 25, 2018, 04:17:48 AM »
Hi,
The last few shows I have recorded with my M10 MK41s and tiny box have been riddled with spots of diginoise.  I was wondering if anyone knows what might be the cause of the problem. Any help would be appreciated.
Thanks!

Offline Sebastian

  • Trade Count: (4)
  • Taperssection All-Star
  • ****
  • Posts: 1303
  • Gender: Male
Re: Diginoise with Schoeps MK41s
« Reply #1 on: May 25, 2018, 06:03:29 AM »
Do you have other capsules that you can test to make sure the MK41s are really the problem here?

Have you tried different cables? Because 9 out of 10 times, problems like these are usually caused by a bad solder joint in a cable connector.
Schoeps { MK6 | MK41V } > NBob actives > {Naiant Tinybox v2.0 | Naiant IPA | Naiant PFAs} > {Zoom F8 | Sony PCM-M10 | Tascam DR-2d | Olympus LS-P1}

Recordings:
Live Music Archive | DaD Torrents | TTD Torrents | Etree Torrents

Offline Gordon

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 10869
  • Gender: Male
    • my list
Re: Diginoise with Schoeps MK41s
« Reply #2 on: May 25, 2018, 08:21:52 AM »
you didn't mention the deck being used either.......
Microtech Gefell M20 or M21 > Nbob actives > Naiant PFA > Sound Devices MixPre-6

https://archive.org/details/fav-gordonlw

Offline heathen

  • Trade Count: (18)
  • Needs to get out more...
  • *****
  • Posts: 2139
Re: Diginoise with Schoeps MK41s
« Reply #3 on: May 25, 2018, 08:37:36 AM »
you didn't mention the deck being used either.......
Looks like M10
Recordings on LMA: https://archive.org/search.php?query=taper%3A%22Lucas+Lorenz%22
Mics: Core Sound TetraMic | AT4031 | AT AE5100 | AT853 (C/SC) | Line Audio CM3 | Sennheiser e614 | Sennheiser MKE2 | DPA 4061 | CA-14 omni | Studio Projects CS5 Pre: CA9200 Decks: Zoom F8 | Roland R-05 | Tascam DR-2d

Offline Gordon

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 10869
  • Gender: Male
    • my list
Re: Diginoise with Schoeps MK41s
« Reply #4 on: May 25, 2018, 08:44:44 AM »
you didn't mention the deck being used either.......
Looks like M10

oops.  not enough coffee yet!  in that case was the card formatted prior to the shows?
Microtech Gefell M20 or M21 > Nbob actives > Naiant PFA > Sound Devices MixPre-6

https://archive.org/details/fav-gordonlw

Offline gewwang

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 6124
Re: Diginoise with Schoeps MK41s
« Reply #5 on: May 25, 2018, 09:48:49 AM »
When I first started stealthing, I quickly learned to secure the cable to the recorder so that the mini cable couldn't move at all. Even if the cable is fine, it could create that digi-noise in the recording when it moved around at all.

 

RSS | Mobile
Page created in 0.145 seconds with 33 queries.
© 2002-2019 Taperssection.com
Powered by SMF