Become a Site Supporter and Never see Ads again!

Author Topic: New Church Audio large capsule mic announced  (Read 994 times)

0 Members and 1 Guest are viewing this topic.

Offline PaulCayard

  • Trade Count: (6)
  • Taperssection Regular
  • **
  • Posts: 68
New Church Audio large capsule mic announced
« on: July 02, 2018, 04:27:21 AM »
From official Facebook page:

"Developing a new mic it will be a full sized balanced mic. A larger version of the ca14 but with a much larger capsule. And removable windscreen. The eta for this mic is about 6 months. I will let you know how it is progressing when I get started. I have the capsules I want to use ( that’s half the battle )"

From comments:
"It will be a 1 inch capsule. That is cardioid. Much like the ca14 capsule except much larger and flatter frequency response."
Mics: Nakamichi CM-300 JB mod (CP-1), AT853 4.7k mod (SC/C/H), AT U853 4.7k mod (C/H), CA-14 (C)
Pre-amp/Power: CA-9200, CA-9100, CA-UBB
Recorder: Roland R-07, Sony M10, Tascam DR-2d (x2), Roland R-05

Offline Papaphunk

  • Trade Count: (4)
  • Taperssection Regular
  • **
  • Posts: 221
Re: New Church Audio large capsule mic announced
« Reply #1 on: July 12, 2018, 11:04:38 AM »
Looking forward to it, big fan of Chris's products.
*******************************************
CA-14 Cardoid Mic's - CA-11 Omni's - Rode M5 Mic's
CA 9200 PreAmp - CA UBB - Rolls Mic Power II B
Busman MOD Tascam DR-70D - TASCAM DR-100MKII 
*******************************************

Recordings on archive: https://archive.org/details/@papaphunk

Online heathen

  • Trade Count: (15)
  • Taperssection All-Star
  • ****
  • Posts: 1222
Re: New Church Audio large capsule mic announced
« Reply #2 on: July 12, 2018, 11:16:15 AM »
Has he said anything about what the form factor of this will be?
Mics: Core Sound TetraMic | AT4031s | AT AE5100s | AT853s (C/SC) | Line Audio CM3s | CA-14 omnis | Studio Projects CS5
Pre: CA9200
Decks: Zoom F8 | Roland R-05

Offline PaulCayard

  • Trade Count: (6)
  • Taperssection Regular
  • **
  • Posts: 68
Re: New Church Audio large capsule mic announced
« Reply #3 on: July 12, 2018, 11:52:47 AM »
I haven't found any other information in Church Audio Facebook official page.
Mics: Nakamichi CM-300 JB mod (CP-1), AT853 4.7k mod (SC/C/H), AT U853 4.7k mod (C/H), CA-14 (C)
Pre-amp/Power: CA-9200, CA-9100, CA-UBB
Recorder: Roland R-07, Sony M10, Tascam DR-2d (x2), Roland R-05

Offline aaronji

  • Site Supporter
  • Trade Count: (6)
  • Needs to get out more...
  • *
  • Posts: 2376
Re: New Church Audio large capsule mic announced
« Reply #4 on: July 12, 2018, 12:24:11 PM »
The eta for this mic is about 6 months.

I wonder what the odds are for the over/under...

One inch (25.4 mm) is pretty big, if they will be end-addressed.  By contrast, DPA caps are 19 mm and Schoeps are 20 mm.

Offline nak700s

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 542
  • Gender: Male
Re: New Church Audio large capsule mic announced
« Reply #5 on: July 12, 2018, 07:06:35 PM »
These probably won't be as stealthy as the CA-14's, but I'm definitely interested in checking them out.
Normal: Nakamichi CM-700's >> SD 744T (or) Sony PCM-M10
Normal: Crown CM-700's >> SD 302 >> SD 744T
Stealth: CA-14c >> CA 9200 >> Edirol R-09HR
Ultra stealth: AudioReality >> AudioReality battery box >> Edirol R-09HR
Simple & Sweet!

Offline pillowman

  • Trade Count: (10)
  • Taperssection Member
  • ***
  • Posts: 384
    • www.openingtime.lima-city.de
Re: New Church Audio large capsule mic announced
« Reply #6 on: July 13, 2018, 03:58:18 AM »
Unfurtunately There are Not that
Much information what to expected
But i believe they will perform
w/9 Volt or 12 Volt.
Size Sounds still stealthable for me
so i am also interested.
Thumbs Up!
...
Pillowman
3x Sony PCM-M10 / TASCAM DR-2d
Sony NH 600 / Sharp MD-MT180(H) / Sony MZ-R35
SP-CMC-8 > AT-ADAPT > AT853 o, c, ATU853 c, hc / AT943 o / CA-11cards vrs.II  / Sony ECM-717
2x Nakamichi CP-3 + primo's (4.7k mod)
SP-SPSB-9 / SP-SPSB-10 / CA-UBB / CA-9100

trading page: www.openingtime.lima-city.de

Offline DSatz

  • Site Supporter
  • Trade Count: (27)
  • Needs to get out more...
  • *
  • Posts: 2503
  • Gender: Male
Re: New Church Audio large capsule mic announced
« Reply #7 on: July 13, 2018, 09:15:58 PM »
aaronji, I think you're confusing the diameter of the complete "capsule head" with that of the (internal) capsule itself. Both dimensions affect a microphone's behavior in a sound field, but the capsule itself has a smaller diameter; in a Schoeps mike it's about half an inch, depending on exactly what/how you measure.

--best regards
music > microphones > a recorder of some sort

Offline aaronji

  • Site Supporter
  • Trade Count: (6)
  • Needs to get out more...
  • *
  • Posts: 2376
Re: New Church Audio large capsule mic announced
« Reply #8 on: July 14, 2018, 02:26:36 PM »
^ No, I am not confusing them.  I am saying that an end addressed (presumably cylindrical) mic with a one inch capsule will be considerably bigger than the 19 mm offerings from DPA (or 20 mm from Schoeps).  At a bare minimum, a third larger in diameter, but, realistically, considerably more than that.  For a cap (part that screws onto the body) to capsule (internal) ratio similar to the Schoeps (20 mm/12.7 mm), it would be about a 40 mm diameter mic... 

Offline Walstib62

  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 2442
  • Gender: Male
Re: New Church Audio large capsule mic announced
« Reply #9 on: July 14, 2018, 04:01:12 PM »
It would be unlikely that the mic would be end address at a 1' dia. It would more likely be side address. (Or vertical, as some would say)    :hmmm:

Online heathen

  • Trade Count: (15)
  • Taperssection All-Star
  • ****
  • Posts: 1222
Re: New Church Audio large capsule mic announced
« Reply #10 on: July 14, 2018, 06:10:51 PM »
FWIW, the Audio-Technica AE5100 is an end address large diaphragm condenser.  I don't know the actual size of the diaphragm though.
Mics: Core Sound TetraMic | AT4031s | AT AE5100s | AT853s (C/SC) | Line Audio CM3s | CA-14 omnis | Studio Projects CS5
Pre: CA9200
Decks: Zoom F8 | Roland R-05

Offline aaronji

  • Site Supporter
  • Trade Count: (6)
  • Needs to get out more...
  • *
  • Posts: 2376
Re: New Church Audio large capsule mic announced
« Reply #11 on: July 16, 2018, 08:30:16 PM »
It would be unlikely that the mic would be end address at a 1' dia. It would more likely be side address. (Or vertical, as some would say)    :hmmm:

Yes, I have been thinking about that, too.  For a cylindrical side/vertical address (like an MK4V) it would (obviously) still need a diameter of a similar size as an end address.  For something non-cylindrical, the housing would have to be greater than an inch on two axes to accommodate the capsule (assuming it is round), but maybe there is some leeway on the third axis (assuming the depth is less than an inch).  Pretty curious what Mr. Church has in mind here...

 

RSS | Mobile
Page created in 0.223 seconds with 40 queries.
© 2002-2018 Taperssection.com
Powered by SMF