Become a Site Supporter and Never see Ads again!

Author Topic: Rødes new SC6-L Mobile Interview Kit  (Read 3090 times)

0 Members and 1 Guest are viewing this topic.

Offline justme

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 55
  • Gender: Male
Rødes new SC6-L Mobile Interview Kit
« on: August 02, 2018, 01:35:09 PM »
The new Røde Interview Kit for iOS with two 3.5mm mic input, headphone out and lightning connector might not have the best dynamic range but for its size it might be a pretty ok stealthy setup.

https://www.rode.com/microphones/sc6-lik


Offline heathen

  • Trade Count: (18)
  • Needs to get out more...
  • *****
  • Posts: 2129
Re: Rødes new SC6-L Mobile Interview Kit
« Reply #1 on: August 02, 2018, 02:04:49 PM »
I wonder if one could use a battery box or small pre with an adapter cable that breaks out to two minis, and then plug each of those into this Rode thingy?
Recordings on LMA: https://archive.org/search.php?query=taper%3A%22Lucas+Lorenz%22
Mics: Core Sound TetraMic | AT4031 | AT AE5100 | AT853 (C/SC) | Line Audio CM3 | Sennheiser e614 | Sennheiser MKE2 | DPA 4061 | CA-14 omni | Studio Projects CS5 Pre: CA9200 Decks: Zoom F8 | Roland R-05 | Tascam DR-2d

Offline justme

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 55
  • Gender: Male
Re: Rødes new SC6-L Mobile Interview Kit
« Reply #2 on: August 02, 2018, 02:54:32 PM »
Details are sparse but it says you can adjust gain on the input at least.

Hopefully there will be some modding opportunities for the input stage.

Offline jerryfreak

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2051
  • I'm a llama! (taboot)
Re: Rødes new SC6-L Mobile Interview Kit
« Reply #3 on: August 03, 2018, 06:04:56 AM »
odd that its lightning/digi in but only 69 db signal to noise ratio? thats quite a bit lower than most decent mics agreed that its probably a crappy gain stage but maybe it can be bypassed altogether

interesting these rode smartlav mics are trrs - they are obviously 3 wire... as is a schoeps CMR which only needs 1mA@ 5V.... this might be able to power them.. though it looks like the smartlav mics themselves only get 2.7V when plugged into an  apple analog jack, and probably the same from the SC6-L

according to this page (not sure how old it is or what model iphone it references), the iphone trrs puts out 1.5V (pretty standard for plug in power mics, no?

regardless it seems this is a good stereo line in option if we can get over the noise floor

« Last Edit: August 03, 2018, 06:13:20 AM by jerryfreak »
in:
small: MK4V/41V > CMR > Tinybox or PiP Squeak or J.Williams Mod MicMan Jr or no pre at all >AD2K or R07 or PCM-A10
smaller: 4061/4099 CORE > d:vice MMA

out:
home:Benchmark DAC1 HGC > Dynaudio BM15A active monitors
shop: Musical Fidelity VLink 192 Asynchronyous> coax> DAC1 > Rokit RP8 active monitors

current goals:making CMR+battery box rig interface with d:vice

Offline scottE

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 7
Re: Rødes new SC6-L Mobile Interview Kit
« Reply #4 on: August 12, 2018, 07:29:43 AM »
Wow that looks very promising especially now with the 2 channel - stereo option.

Here is a short video with more info https://www.youtube.com/watch?v=mfn01O6zV5g

SP-BMC-12
SP-SPSB-6

Offline RTD

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 39
Re: Rødes new SC6-L Mobile Interview Kit
« Reply #5 on: August 18, 2018, 06:54:40 PM »
would it run with two DPA 4060?

Offline jerryfreak

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2051
  • I'm a llama! (taboot)
Re: Rødes new SC6-L Mobile Interview Kit
« Reply #6 on: August 18, 2018, 08:20:02 PM »
if youve already got 4060s just spring for a d:vice
in:
small: MK4V/41V > CMR > Tinybox or PiP Squeak or J.Williams Mod MicMan Jr or no pre at all >AD2K or R07 or PCM-A10
smaller: 4061/4099 CORE > d:vice MMA

out:
home:Benchmark DAC1 HGC > Dynaudio BM15A active monitors
shop: Musical Fidelity VLink 192 Asynchronyous> coax> DAC1 > Rokit RP8 active monitors

current goals:making CMR+battery box rig interface with d:vice

Offline RTD

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 39
Re: Rødes new SC6-L Mobile Interview Kit
« Reply #7 on: August 19, 2018, 03:52:48 AM »
sure, but this is also a question of budget. :-[

Offline scottE

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 7
Re: Rødes new SC6-L Mobile Interview Kit
« Reply #8 on: August 22, 2018, 10:55:28 AM »
sure, but this is also a question of budget. :-[

Yes indeed! Not every taper has an unlimited budget.

Also if this kit works fine it may help new tapers with only an Iphone to get into recording concerts we all wanna hear ;)
SP-BMC-12
SP-SPSB-6

Offline jerryfreak

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2051
  • I'm a llama! (taboot)
Re: Rødes new SC6-L Mobile Interview Kit
« Reply #9 on: August 22, 2018, 09:11:51 PM »
sure, but this is also a question of budget. :-[

Yes indeed! Not every taper has an unlimited budget.

Also if this kit works fine it may help new tapers with only an Iphone to get into recording concerts we all wanna hear ;)
see ambeo thread, if you already have an iphone its a $200 investment and you get noise cancelling headphones you can use when not taping
in:
small: MK4V/41V > CMR > Tinybox or PiP Squeak or J.Williams Mod MicMan Jr or no pre at all >AD2K or R07 or PCM-A10
smaller: 4061/4099 CORE > d:vice MMA

out:
home:Benchmark DAC1 HGC > Dynaudio BM15A active monitors
shop: Musical Fidelity VLink 192 Asynchronyous> coax> DAC1 > Rokit RP8 active monitors

current goals:making CMR+battery box rig interface with d:vice

Offline scottE

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 7
Re: Rødes new SC6-L Mobile Interview Kit
« Reply #10 on: October 10, 2018, 05:43:36 AM »
So still interested to hear if someone has got this set and recorded any shows with this SC6-L Mobile Interview Kit ?

Also any ideas if would it be possible to connect SP-SPSB-6 microphones to this SC6-L or what kind of connector would it need to connect 3,5mm stereo to this SC6-L?



SP-BMC-12
SP-SPSB-6

Offline jerryfreak

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2051
  • I'm a llama! (taboot)
Re: Rødes new SC6-L Mobile Interview Kit
« Reply #11 on: April 08, 2019, 04:25:35 PM »
i just grabbed one of these to test. puts out 2.25V on the sleeve of the TRRS jacks so doesnt seem super useful for powering most decent lavs. i think there are some church mics that run on voltage that low that might be a match

i got the interface only, not the rode 'smartlavs' which are decent but a little low on the max spl for my tastes

ill do some noise measurements on it later

apogee metarecorder recognizes the device and has full range of gain available
« Last Edit: April 08, 2019, 04:39:40 PM by jerryfreak »
in:
small: MK4V/41V > CMR > Tinybox or PiP Squeak or J.Williams Mod MicMan Jr or no pre at all >AD2K or R07 or PCM-A10
smaller: 4061/4099 CORE > d:vice MMA

out:
home:Benchmark DAC1 HGC > Dynaudio BM15A active monitors
shop: Musical Fidelity VLink 192 Asynchronyous> coax> DAC1 > Rokit RP8 active monitors

current goals:making CMR+battery box rig interface with d:vice

Offline ycoop

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 483
  • Gender: Male
Re: Rødes new SC6-L Mobile Interview Kit
« Reply #12 on: April 08, 2019, 05:46:45 PM »
i just grabbed one of these to test. puts out 2.25V on the sleeve of the TRRS jacks so doesnt seem super useful for powering most decent lavs. i think there are some church mics that run on voltage that low that might be a match

i got the interface only, not the rode 'smartlavs' which are decent but a little low on the max spl for my tastes

ill do some noise measurements on it later

apogee metarecorder recognizes the device and has full range of gain available

Would have been mighty surprised if this thing could put out enough voltage to adequately power anything we use. Still looks potentially useful as a deck after a small preamp.
Mics: Avantone CK-1s, CA-14 omnis
Pres: CA9100
Recorders: Marantz PMD-706, DR-60d mkII, DR-22wl

Offline jerryfreak

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2051
  • I'm a llama! (taboot)
Re: Rødes new SC6-L Mobile Interview Kit
« Reply #13 on: April 08, 2019, 06:00:51 PM »
ok so the only input is thru the powered mic in. i used a 10uF cap to block power. input is mic level and sensitive,  likely to match the smartlav+ mic output (which is almost identical to a 4060). input might overload easily, i had the levels pretty far down. would have to experiment with some different mics. i wonder how the 3V 4063s would do at 2.25V?


TRRS:
tip-no connection
ring-no connection
ring-ground
sleeve-mic in

id say for a mic-in its pretty adequate for our purposes
I played 2 Beck tracks out of my DAC1s headphone output with a 1 minute silent track in between.
i peaked levels at -4 dB in metarecorder, when peaks normalized to 0dB, the noise in the silent track was really low, -85dB RMS, on par with any handheld ive seen and right there with the d:vice (both using cheap caps)

seems like a good option for iphone recording, ill get some good TRRS cables and make a stereo pair

here is that Beck track i recorded if you want to hear how it sounds. i had to cut off the beginning of the track to prevent it from getting pulled for copyright. so its the end of one track and beginning of another with the 1 minute silence in there

https://soundcloud.com/user-498275808/beck-sc6-l-edit

 


« Last Edit: April 08, 2019, 07:41:01 PM by jerryfreak »
in:
small: MK4V/41V > CMR > Tinybox or PiP Squeak or J.Williams Mod MicMan Jr or no pre at all >AD2K or R07 or PCM-A10
smaller: 4061/4099 CORE > d:vice MMA

out:
home:Benchmark DAC1 HGC > Dynaudio BM15A active monitors
shop: Musical Fidelity VLink 192 Asynchronyous> coax> DAC1 > Rokit RP8 active monitors

current goals:making CMR+battery box rig interface with d:vice

Offline scottE

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 7
Re: Rødes new SC6-L Mobile Interview Kit
« Reply #14 on: April 13, 2019, 09:43:38 AM »
Wow ! Very good sound quality. :D

What microphones did you record this with?
SP-BMC-12
SP-SPSB-6

 

RSS | Mobile
Page created in 0.199 seconds with 42 queries.
© 2002-2019 Taperssection.com
Powered by SMF