Become a Site Supporter and Never see Ads again!

Author Topic: Custom cables, to techflex or not to techflex?  (Read 1971 times)

0 Members and 1 Guest are viewing this topic.

Offline Perry

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 446
  • Gender: Male
Re: Custom cables, to techflex or not to techflex?
« Reply #15 on: October 01, 2018, 11:06:53 PM »
Split-length Techflex is easier to use, especially if the connectors are already installed, but adds significantly more bulk than the non-split type.
Agreed. For one, the overlapping design of the split requires more material (read: bulk) per inch. When it comes to stowing, I would imagine the split design has a larger minimum bend radius vs non-split (all else being equal). The fused edges at the split seem to slightly reduce the overall flexibility- this is more notable with a full jacket.



"It hurts to lean back in handcuffs..."
^^~~~~~~~Todd Snider~~~~~~~^^

Offline willndmb

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 6674
  • Gender: Male
Re: Custom cables, to techflex or not to techflex?
« Reply #16 on: October 06, 2018, 10:33:55 PM »
I hate a single wrap, techflex or tape/shrink
It seems one cable always wants to roll different from the other and never sends up laying flat.
I'll take two cables all day
Actually if I could, I would take a single cable that splits out like my tinybox.
Best of both worlds. One cable for 90% of the way but detachable dual cable so nothing gets tangled
« Last Edit: October 06, 2018, 10:36:05 PM by willndmb »
Mics - AKG ck61/ck63 (c480b & Naiant actives), SP-BMC-2
XLR Cables - Silver Path w/Darktrain stubbies
Interconnect Cables - Dogstar (XLR), Darktrain (RCA > 1/8) (1/8 > 1/8), and Kind Kables (1/8f > 1/4)
Preamps - Naiant Littlebox & Tinybox
Recorders - PCM-M10 & DR-60D

Offline heathen

  • Trade Count: (16)
  • Taperssection All-Star
  • ****
  • Posts: 1671
Re: Custom cables, to techflex or not to techflex?
« Reply #17 on: October 07, 2018, 10:04:53 PM »
What sort of cable would be necessary to make a stereo balanced mic pair cable?  Five wire?  Six? Then it would need a Y adapter at each end right?
Recordings on LMA: https://archive.org/search.php?query=taper%3A%22Lucas+Lorenz%22
Mics: Core Sound TetraMic | AT4031s | AT AE5100s | AT853s (C/SC) | Line Audio CM3s | DPA 4061s | CA-14 omnis | Studio Projects CS5 Pre: CA9200 Decks: Zoom F8 | Roland R-05 | Tascam DR-2d

Offline illconditioned

  • Trade Count: (7)
  • Needs to get out more...
  • *****
  • Posts: 2671
Re: Custom cables, to techflex or not to techflex?
« Reply #18 on: October 08, 2018, 01:12:32 AM »
For general usage I really like Mogami W3106 "siamese cable".  The pair looks like heavy electrical cable.  Each one has served shield + two cables inside.Very nice to work with and works well.
I have not bought any recently.  If anyone finds a good source, please post here.  I'd like to make some new cables.
Thanks,  Richard
Please DO NOT mail me with tech questions.  I will try to answer in the forums when I get a chance.  Thanks.

Sample recordings at: http://www.soundmann.com.

 

RSS | Mobile
Page created in 0.162 seconds with 32 queries.
© 2002-2018 Taperssection.com
Powered by SMF