So I recently acquired a pair of Toa K2s from the YS and am going to try them out soon. I really can't find a lot of info on the boards about these mics, so I'm curious if anyone has examples of their setups with K2s. I record with Nak CM-100s and 300s and AT-853s usually. Should my Toa setup differ any from how I use the Naks? The info I have collected from YS threads indicates to use the K2s with AAs or phantom power. The ancient Nak instructions also indicate to use AAs but I have always used 2 6V batteries taped together in my Naks. Which would be better for the K2s? I record with the DR-70D, which I believe offers 24 or 48V phantom via the XLR outputs. Would this be appropriate for the K2s, or is that way too much voltage for mics that only are supposed to require 1.5V?
One last thing - Should I expect similar sensitivity with my K2s compared to the Naks? Or does that depend on voltage used?