Become a Site Supporter and Never see Ads again!

Author Topic: Tascam DR-05 settings guide  (Read 438 times)

0 Members and 1 Guest are viewing this topic.

Offline emalvido

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 109
Tascam DR-05 settings guide
« on: October 18, 2018, 04:21:32 PM »
Hello to all

My two mic options using recently purchased a Tascam DR-05

OKMII/R>A3>DR-05
SP-CMC-8>ST-9100>DR-05

Loud rock music:
With the OKM´s  manually, the recording level is on the minimum, but the meters hit all the way up,  usually the red led blinks peaking and overloads if its extra thump/loud overloading.
The A3 battery box does not have levels
Is there a way to prevent this? wich one recomend to use?
-Peak Reduction
-Auto Level
-Limiter

When taping with the SP-CMC-8>ST-9100
I can turn the level up/down on the ST-9100 and can record with no overload problems.
Also, if there is a settings guide recording with the DR-05 could some one point me where to look it?

Thanks

Offline ycoop

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 335
  • Gender: Male
Re: Tascam DR-05 settings guide
« Reply #1 on: October 18, 2018, 05:21:58 PM »
Do you have the DR-05 set to line in or mic in?
Mics: Avantone CK-1s, CA-14 omnis
Pres: CA9100
Recorders: DR-60d mkII, DR-22wl, DR-07

Offline emalvido

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 109
Re: Tascam DR-05 settings guide
« Reply #2 on: October 18, 2018, 06:19:35 PM »
I plug it in the only one aviable wich is located on the top of the unit:
MIC/EXT IN Jack

Offline ycoop

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 335
  • Gender: Male
Re: Tascam DR-05 settings guide
« Reply #3 on: October 18, 2018, 07:16:17 PM »
There’s a setting for “mic power.” If you turn that off it should treat the input as line level.
Mics: Avantone CK-1s, CA-14 omnis
Pres: CA9100
Recorders: DR-60d mkII, DR-22wl, DR-07

 

RSS | Mobile
Page created in 0.143 seconds with 31 queries.
© 2002-2018 Taperssection.com
Powered by SMF