Become a Site Supporter and Never see Ads again!

Author Topic: Schoeps Omni caps which one ?  (Read 1019 times)

0 Members and 1 Guest are viewing this topic.

Online noahbickart

  • phishrabbi
  • Site Supporter
  • Trade Count: (31)
  • Taperssection All-Star
  • *
  • Posts: 1953
  • Gender: Male
  • So now I wander over grounds of light...
Re: Schoeps Omni caps which one ?
« Reply #15 on: January 02, 2019, 12:09:52 AM »
Phish 12/31/18 mk3 (2xs) AB 50cm:
http://bt.etree.org/details.php?torrentId=603603
Recording:
Capsules: Schoeps mk41v (x2), mk4v (x2), mk22 (x2), mk3 (x2), mk21 & mk8
Cables: 2x nbob KCY, 1 pair nbob actives, Darktrain 2 and 4 channel KCY extensions:
Preamps:    Schoeps VMS 02iub, Naiant Littlebox, Naiant IPA, Sound Devices Mixpre6
Recorders: Sound Devices Mixpre6, Sony PCM m10

Home Playback: Mytek DSD 192> McIntosh MC162> Eminent Tech LFT-16; Musical Fidelity xCan v2> Hifiman HE-4XX / Beyerdynamic DT880

Office Playback: Grace m903> AKG k701 / Hifiman HE-400

Offline checht

  • Trade Count: (2)
  • Taperssection Regular
  • **
  • Posts: 217
  • Gender: Male
  • Old and in the Way
Re: Schoeps Omni caps which one ?
« Reply #16 on: January 08, 2019, 01:54:23 PM »
Any microphone can only pick up sound from the sound field where it is. That's all it can do; it can't respond to whatever may be going on elsewhere. There's this mistaken idea that you "aim" a microphone at some sound source/sources a distance away, and it will respond to whatever's there; that's fine for cameras and telescopes since light travels in straight lines. But it's not a good way to think about sound and microphones in most practical situations, since sound spreads out in all directions from its source, and bounces around way more than you might think.
[snip]
Instead, consider where the microphone is, and realize that at best, it can only record what's going on where it is.

--best regards

I've been grappling with shifting my cognitive model on this in relation to both capsule selection and configuration/alignment with primary sound source.

Please pardon my ignorance, but I've been wondering what role the pattern plays when recording in 'the usual' situation. Would it be the case that a more directional pattern's primarily impact would be on pick up of nearby sound sources (crowd noise)? DSatz, that was my takeaway from our previous conversation.

1. Following up on that conversation, I'm wondering if anyone here has thoughts on how that relates to aiming mics. I usually run a mstc64, a fixed ortf config. When located off-center in a venue, I end up wondering if I should point the centerline between the 2 caps straight ahead, or at the center of the stage.

2. For a related but separate question, given that we're recording the sound where the mic is (a shotgun won't improve ratio of direct to reflected sound), why not use omnis, which I believe are the most uncolored pattern. I guess this choice would result in more nearby sound; what would be other downsides?

Thanks for this thoughtful thread, which has already advanced my understanding quite a bit.

~Chris

Schoeps MSTC64g, Shure MV-88
Schoeps KCY 250/0 lg, Naiant IPA, PFA 60v
Sound Devices MP-6, Roland R-07

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 12747
  • Gender: Male
Re: Schoeps Omni caps which one ?
« Reply #17 on: January 08, 2019, 05:34:44 PM »
Reverberant sound arrives from all directions equally, including the same direction as the direct sound of interest.  If recording from well back in the reverberant field far from the source of the direct sound, even a theoretically ideal super-directional microphone with an extremely narrow pickup pattern pointed directly at the source is going to pick up considerably more reverberant than direct sound.

In that case the best one can do is to seek to preserve whatever direct/reverberant ratio is represented by that on-axis directional microphone by being less sensitive to sound from other directions. The value of highly directional patterns in this regard is that they are less sensitive to non-reverberant sound arriving from other directions-  audience noise, reflections off walls, that is to say-  alternate direct sound sources and secondary reflections which arive off-axis from the primary source direction.   Just keep in mind that the reverberance from all sources arrives from all directions equally and will be picked up regardless of what you do with microphones at the recording position.

Directional microphones essentially act more like side-shades or blinders rather than as telescopic zoom lenses.

I'm wondering if anyone here has thoughts on how that relates to aiming mics. I usually run a mstc64, a fixed ortf config. When located off-center in a venue, I end up wondering if I should point the centerline between the 2 caps straight ahead, or at the center of the stage.

The key is to orient your microphone array so it is pointing at the apparent acoustic center, rather than the visual center.  Use your ears instead of your eyes to do this. Close your eyes and turn your head until the sound is as well balanced as possible Left/Right.  Point the microphone array in the same direction.  If off-center you will typically end up facing toward the closer PA, rather than toward center stage.  That's the essence of it, but if you wish to read more you can search TS for dedicated threads on it as this topic comes up regularly.

Quote
For a related but separate question, given that we're recording the sound where the mic is (a shotgun won't improve ratio of direct to reflected sound), why not use omnis, which I believe are the most uncolored pattern. I guess this choice would result in more nearby sound; what would be other downsides?

This can be a very good choice outdoors, where there are not as many reflections off internal walls which directional mics can help deal with indoors.  Nearby audience pickup is about the same indoors or out- omnis will pickup more of it, directional microphones less if it is coming from a less sensitive direction.  If the audience noise is on-axis, then a directional microphone will pick up just as much of it as an omni.

If you want to reduce pickup of direct and reflected sound from directions other than the direction toward the source of interest as much as possible, point your super or hypercardioids directly at the source(s) of interest.  Since this typically translates to very little angle between microphones, space the microphones further apart to compensate so that the stereo image will not collapse.  Check out the Improved PAS table which suggests the most appropriate spacing between microphones with this in mind given whatever pattern and angle you are using.  This won't pull-in more direct sound at your recording position nor increase the direct/indirect-sound ratio available available from that location, but it will make the most of it by being less sensitive to other directions from which there is just as much reverberation but considerably less desired direct sound arriving.

Other things to consider are what type of stereo sound you like- if you want more level-difference stereo aspects, or time-of-arrival spaced-omni stereo aspects or whatever balance between them.

Hope that makes sense.
« Last Edit: January 09, 2019, 08:41:04 AM by Gutbucket »
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<<

Offline checht

  • Trade Count: (2)
  • Taperssection Regular
  • **
  • Posts: 217
  • Gender: Male
  • Old and in the Way
Re: Schoeps Omni caps which one ?
« Reply #18 on: January 08, 2019, 08:28:33 PM »
That omfp does make sense, and is much appreciated.

Thanks
Schoeps MSTC64g, Shure MV-88
Schoeps KCY 250/0 lg, Naiant IPA, PFA 60v
Sound Devices MP-6, Roland R-07

Offline beenjammin

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 42
Re: Schoeps Omni caps which one ?
« Reply #19 on: January 16, 2019, 05:00:17 PM »
Phish 12/31/18 mk3 (2xs) AB 50cm:
http://bt.etree.org/details.php?torrentId=603603

These are really nice pulls and show off how lovely the Schoeps omni caps are.

I'm an avid user of the MK 2, which I use in AB ~40cm and in a Jecklin disk. I typically use a high frequency shelf, and adjust as needed. But I wonder: to emulate the MK2S and the other omni caps, should I use a peak filter?

 

Offline DSatz

  • Site Supporter
  • Trade Count: (31)
  • Needs to get out more...
  • *
  • Posts: 2619
  • Gender: Male
Re: Schoeps Omni caps which one ?
« Reply #20 on: January 16, 2019, 06:28:24 PM »
You can use a peaking filter or a shelving filter. For reasons I can't explain, in the past I've chosen a peaking filter when taming some old recordings that I'd made with Neumann KM 83 microphones (free-field-equalized response like Schoeps MK 2 XS/MK 3), but a shelving filter whenever I've wanted to lift the treble a little.

But use your ears. Main thing is, don't overdo it; 2 dB goes a long way.

--best regards
music > microphones > a recorder of some sort

Offline jerryfreak

  • Trade Count: (12)
  • Taperssection All-Star
  • ****
  • Posts: 1827
  • I'm a llama! (taboot)
Re: Schoeps Omni caps which one ?
« Reply #21 on: January 16, 2019, 06:50:22 PM »
(This type of sphere also works with the Schoeps MK 5 two-pattern capsule in its omnidirectional setting.)

--best regards

i wonder if a smaller sphere would work to make 4061s more directional. the diaphragms arent forward facing on them though. im using my 4061s more these days but boy they pick up the chatter

Offline voltronic

  • Trade Count: (29)
  • Needs to get out more...
  • *****
  • Posts: 2646
Re: Schoeps Omni caps which one ?
« Reply #22 on: January 16, 2019, 07:14:50 PM »
(This type of sphere also works with the Schoeps MK 5 two-pattern capsule in its omnidirectional setting.)

--best regards

i wonder if a smaller sphere would work to make 4061s more directional. the diaphragms arent forward facing on them though. im using my 4061s more these days but boy they pick up the chatter

The DPA 4060/4061 is perhaps the most top-to-bottom perfect omni pattern mic out there.  You are fighting a losing battle.  This is definitely not the mic to use around a chatty audience.  They pick up everything.  I only use mine up close on stage, or if not that close, in a setting where the audience is silent or (even better) not there at all.

Gutbucket has quite a bit of experience making APE spheres for the 4060/4061, but not for this purpose.  The short answer is this modification it isn't going to do what you want.  He can explain to you much better than I can about how APE spheres work, as can DSatz.  In the meantime, here is a somewhat-simple explanation on APE spheres from DPA, who sell them for their full-size 4006A omni:
https://www.dpamicrophones.com/accessories/acoustic-pressure-equalizer-ball-for-4006a
DPA 4061 | Line Audio CM3 | Naiant X-Q
Naiant PFAs | Shure FP24
Tascam DR-70D JWMod | Sony PCM-M10

Tascam DR-70D FAQ
Team Line Audio
Quote
I am hitting my head against the walls, but the walls are giving way.    ///    If a composer could say what he had to say in words he would not bother trying to say it in music.
- Gustav Mahler

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 12747
  • Gender: Male
Re: Schoeps Omni caps which one ?
« Reply #23 on: Yesterday at 09:53:10 AM »
All ominis are.. well, omnidirectional for the most part. Those with larger diaphragms, larger housings, or sphere attachments are somewhat directional at treble frequencies, but in practical terms that limited directionality is really more like a difference of timbre on and off axis than a reduction of sensitivity off-axis.  In my experience you'll hear the same chatter off-axis, yet slightly less present sounding and clearly articulated compared to an on-axis source.  It retains the "natural soundingness" in all directions but shifts a bit more focus toward the on-axis direction.

This quality is imparted from the geometry of the sphere.  When installed in a sphere a miniature 4060 omni is no longer miniature.  If you were to make a dummy housing with the same geometry as a 4006 and mount a 4060 flush in the end of the cylinder so that just the grid extended out the end, it would produce a similar polar pattern to the 4006, or most any other omni with the same size capsule and body.

[edit- typical sphere attachments are larger in diameter than a 4006. Because of that, when using one the polar pattern in the frequency range effected will be more strongly affected because of that larger size.  A sphere is useful compared to other shapes because with the microphone mounted flush it presents a smooth continuous surface all the way around without any diffractive edges or other features until the back side where the microphone body or cable exits.  Because of that it provides the smoothest pattern transitions compared to alternate shapes]

BTW, the 406x is essentially end-address and should be thought of as such when doing odd things like this with it, regardless of the orientation of the miniature element inside its tiny housing.  However as voltronic mentions, when used in free space without anything altering it's size, it is essentially omnidirectional up to the limits of hearing, so in normal use its orientation really doesn't matter much.
« Last Edit: Yesterday at 06:11:37 PM by Gutbucket »
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<<

Offline beenjammin

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 42
Re: Schoeps Omni caps which one ?
« Reply #24 on: Yesterday at 04:57:37 PM »
You can use a peaking filter or a shelving filter. For reasons I can't explain, in the past I've chosen a peaking filter when taming some old recordings that I'd made with Neumann KM 83 microphones (free-field-equalized response like Schoeps MK 2 XS/MK 3), but a shelving filter whenever I've wanted to lift the treble a little.

But use your ears. Main thing is, don't overdo it; 2 dB goes a long way.

--best regards

Thanks!

I have another Schoeps omni question. I understand that each cap is an iteration of the MK2, with differences in high frequency sensitivity. But the MK H has that metal ring around it. I recall reading somewhere that this capsule was developed in collaboration with Onno Schultze. What, if any, effect does the ring have? I believe Schultze was very much impressed by the miniature DPA 4060, might the ring help to make the Schoeps capsule behave as if it were smaller than it is?

 

RSS | Mobile
Page created in 0.159 seconds with 37 queries.
© 2002-2019 Taperssection.com
Powered by SMF