Become a Site Supporter and Never see Ads again!

Author Topic: AD2K Power options  (Read 308 times)

0 Members and 1 Guest are viewing this topic.

Offline tapjunkie

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 155
AD2K Power options
« on: June 07, 2019, 07:44:00 PM »
My Tekkeon batteries have decided to stop sending 12 volts to the AD2K.  No matter what I do, it will not power the unit and when it does go to "12" volt, it automatically switched to the lowest voltage.  Does anyone have a suggestion how to fix this, or offer another battery option?  Any help will be appreciated.

Thanks

Online jerryfreak

  • Trade Count: (20)
  • Needs to get out more...
  • *****
  • Posts: 2300
  • I'm a llama! (taboot)
Re: AD2K Power options
« Reply #1 on: June 07, 2019, 09:03:23 PM »
not sure how servicable those are. is there a setting above 12V?
in:
small: MK4/4V > CMR > V3 or J.Williams Mod MicMan Jr or no pre at all >AD2K/R07/PCM-A10/Oade Warm 661/DR100-MKIII

smaller: 4061/4099 CORE or 4011/4018V> d:vice MMA



out:
home:Benchmark DAC1 HGC > Dynaudio BM15A active monitors
shop: Musical Fidelity VLink 192 Asynchronyous> coax> DAC1 > Rokit RP8 active monitors

Offline tapjunkie

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 155
Re: AD2K Power options
« Reply #2 on: June 08, 2019, 06:11:24 PM »
Yes, I believe there is one or two higher voltages above 12.

Online jerryfreak

  • Trade Count: (20)
  • Needs to get out more...
  • *****
  • Posts: 2300
  • I'm a llama! (taboot)
Re: AD2K Power options
« Reply #3 on: June 08, 2019, 08:00:21 PM »
i think it can take up to 18V

in:
small: MK4/4V > CMR > V3 or J.Williams Mod MicMan Jr or no pre at all >AD2K/R07/PCM-A10/Oade Warm 661/DR100-MKIII

smaller: 4061/4099 CORE or 4011/4018V> d:vice MMA



out:
home:Benchmark DAC1 HGC > Dynaudio BM15A active monitors
shop: Musical Fidelity VLink 192 Asynchronyous> coax> DAC1 > Rokit RP8 active monitors

Offline audBall

  • Trade Count: (36)
  • Needs to get out more...
  • Posts: 5934
  • Gender: Male
Re: AD2K Power options
« Reply #4 on: June 08, 2019, 08:47:01 PM »
akg ck61/62/63/77(c577)|naiant.pfa, dpa smk-sc4061 
lunatec v2, d:vice
edirol-r44(ocm), sony pcm-m10,-d100

Offline fanofjam

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 305
Re: AD2K Power options
« Reply #5 on: June 10, 2019, 07:25:36 PM »
One or more of the individual cells inside your tekkeon battery has bit the dust.  Which tekkeon model is it?  If it's the 3300, those are really simple to refurbish with new 18650 cells and make it as good as or better than new.  If it's the 3450, those are a PITA to refurb.

Offline tapjunkie

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 155
Re: AD2K Power options
« Reply #6 on: June 13, 2019, 08:01:33 PM »
Thanks for the tips everyone!

 

RSS | Mobile
Page created in 0.099 seconds with 35 queries.
© 2002-2019 Taperssection.com
Powered by SMF