Become a Site Supporter and Never see Ads again!

Author Topic: Manfrotto extension pole and super clamp setup  (Read 2380 times)

0 Members and 1 Guest are viewing this topic.

Offline ts

  • Trade Count: (68)
  • Needs to get out more...
  • *****
  • Posts: 3262
  • Gender: Male
Manfrotto extension pole and super clamp setup
« on: June 16, 2019, 10:23:57 AM »
I can’t find any of my studs :help: which stud works the best in this scenario? Thanks. :yack:
Beyerdynamic CK930>Sound Devices MixPre 6

Offline if_then_else

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 366
Re: Manfrotto extension pole and super clamp setup
« Reply #1 on: June 16, 2019, 10:36:54 AM »

Online goodcooker

  • Trade Count: (37)
  • Needs to get out more...
  • *****
  • Posts: 3352
  • Gender: Male
  • goes to 11
Re: Manfrotto extension pole and super clamp setup
« Reply #2 on: June 16, 2019, 10:41:37 AM »
I haven't had an extension pole in a while but IIRC I just used the regular 013 double ended regular length spigot.

There is also a spigot that has a hex flat side on one end that keeps it from rotating on the clamp side. I think it's the 036.

Edit - you found it while I was typing. That's the one.
« Last Edit: June 16, 2019, 10:43:11 AM by goodcooker »
Joly Mod Oktava MK012 C,H,O  or NakCM300 > Sound Devices 442 or Reference Audio Designs MS2 > Tascam DR701d
Transfers - Tascam DA30 (dats) or Nak MR2 (cassettes) > Sound Devices USB Pre

http://www.archive.org/bookmarks/goodcooker

"Are you the Zman?" - fan at Panic 10-08-10 Kansas City
"I don't know who left this perfectly good inflatable wook doll here, but if I'm blowing her up, I'm keeping her." -  hoppedup

Offline ts

  • Trade Count: (68)
  • Needs to get out more...
  • *****
  • Posts: 3262
  • Gender: Male
Re: Manfrotto extension pole and super clamp setup
« Reply #3 on: June 16, 2019, 11:37:51 AM »
Thanks guys. I have two 036’s ordered. I know I’ll lose one. :smash:
Beyerdynamic CK930>Sound Devices MixPre 6

Offline checht

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 351
  • Gender: Male
  • Old and in the Way
Schoeps MK41s > nbob KCY >
Naiant PFA 60v > Sound Devices MP-6  or  Naiant IPA > Roland R-07

Offline jerryfreak

  • Trade Count: (29)
  • Needs to get out more...
  • *****
  • Posts: 3882
  • the data guy
Re: Manfrotto extension pole and super clamp setup
« Reply #5 on: June 17, 2019, 10:50:29 AM »
im about to order a new superclamp and pole for redrocks

does the 035RL work with the pole out of the box or do i need the 036 stud mentioned

https://www.amazon.com/Manfrotto-035RL-Super-Clamp-Standard/dp/B0018LQVIA

will that clamp on the 1.5-2" rail at red rocks. last year i remember one taper had something burlier that looked like a vise
team schoeps, dpa, benchmark, and zoom mostly... subject to change without warning

Offline DavidPuddy

  • Trade Count: (10)
  • Taperssection Member
  • ***
  • Posts: 674
Re: Manfrotto extension pole and super clamp setup
« Reply #6 on: June 17, 2019, 11:11:13 AM »
im about to order a new superclamp and pole for redrocks

does the 035RL work with the pole out of the box or do i need the 036 stud mentioned

https://www.amazon.com/Manfrotto-035RL-Super-Clamp-Standard/dp/B0018LQVIA

will that clamp on the 1.5-2" rail at red rocks. last year i remember one taper had something burlier that looked like a vise

099b pole? It works out of the box with the included stud
Mics: nbobs/480+ck61/62/63; C568EB; MKE2
Recorders: MP6; A10
puddylivemusic@gmail.com

Offline jerryfreak

  • Trade Count: (29)
  • Needs to get out more...
  • *****
  • Posts: 3882
  • the data guy
Re: Manfrotto extension pole and super clamp setup
« Reply #7 on: June 17, 2019, 11:52:46 AM »
 Any issue with taking the 099b as carry-on. I don’t want to deal with checking luggage if I can help it.
team schoeps, dpa, benchmark, and zoom mostly... subject to change without warning

Offline DavidPuddy

  • Trade Count: (10)
  • Taperssection Member
  • ***
  • Posts: 674
Re: Manfrotto extension pole and super clamp setup
« Reply #8 on: June 17, 2019, 12:37:27 PM »
I just flew AA and Delta 2 weeks ago with no problem. Had to explain it to TSA but that's it.
Mics: nbobs/480+ck61/62/63; C568EB; MKE2
Recorders: MP6; A10
puddylivemusic@gmail.com

Online BonoBeats

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 736
  • Gender: Male
    • My Band- Funk Pocket
Re: Manfrotto extension pole and super clamp setup
« Reply #9 on: June 25, 2019, 11:38:05 AM »
im about to order a new superclamp and pole for redrocks

does the 035RL work with the pole out of the box or do i need the 036 stud mentioned

https://www.amazon.com/Manfrotto-035RL-Super-Clamp-Standard/dp/B0018LQVIA

will that clamp on the 1.5-2" rail at red rocks. last year i remember one taper had something burlier that looked like a vise

SuperClamp will work at Red Rocks. I do have a 4" clamp for other situations, but not necessary in this case.

https://www.bhphotovideo.com/c/product/1179094-REG/kupo_kg602912_super_viser_clamp_with.html?ap=y&gclid=EAIaIQobChMI5MWPiPuE4wIVCv5kCh1rHQPxEAQYAiABEgIPnfD_BwE&smp=y

Now You See Me Telefunken M60 Masters>MixPre6
Now You Don't    Naiant XX>SP-SB10>Roland R05

Offline noahbickart

  • phishrabbi
  • Site Supporter
  • Trade Count: (32)
  • Needs to get out more...
  • *
  • Posts: 2341
  • Gender: Male
  • So now I wander over grounds of light...
Re: Manfrotto extension pole and super clamp setup
« Reply #10 on: June 25, 2019, 12:00:22 PM »
im about to order a new superclamp and pole for redrocks

does the 035RL work with the pole out of the box or do i need the 036 stud mentioned

https://www.amazon.com/Manfrotto-035RL-Super-Clamp-Standard/dp/B0018LQVIA

will that clamp on the 1.5-2" rail at red rocks. last year i remember one taper had something burlier that looked like a vise

SuperClamp will work at Red Rocks. I do have a 4" clamp for other situations, but not necessary in this case.

https://www.bhphotovideo.com/c/product/1179094-REG/kupo_kg602912_super_viser_clamp_with.html?ap=y&gclid=EAIaIQobChMI5MWPiPuE4wIVCv5kCh1rHQPxEAQYAiABEgIPnfD_BwE&smp=y

That's a nice clamp. does a rapid adaptor fir on the end?
Recording:
Capsules: Schoeps mk41v (x2), mk22 (x2), mk3 (x2), mk21 & mk8
Cables: 2x nbob KCY, 1 pair nbob actives, GAKables 10' & 20' 6-channel snakes, Darktrain 2 & 4 channel KCY and mini xlr extensions:
Preamps:    Schoeps VMS 02iub, Naiant IPA, Sound Devices Mixpre6 I
Recorders: Sound Devices Mixpre6 I, Sony PCM m10

Home Playback: Mac Mini> Mytek Brooklyn+> McIntosh MC162> Eminent Tech LFT-16; Musical Fidelity xCan v2> Hifiman HE-4XX / Beyerdynamic DT880

Office Playback: iMac> Grace m903> AKG k701 / Hifiman HE-400

Offline jerryfreak

  • Trade Count: (29)
  • Needs to get out more...
  • *****
  • Posts: 3882
  • the data guy
Re: Manfrotto extension pole and super clamp setup
« Reply #11 on: June 25, 2019, 03:35:30 PM »
i did pick up the 099b poles but those are way overkill for me, the 122b is a much better fit imo, will be getting those instead

https://www.bhphotovideo.com/c/product/5359-REG/Manfrotto_122B_122B_Adjustable_Pole_for.html#!

team schoeps, dpa, benchmark, and zoom mostly... subject to change without warning

Offline ts

  • Trade Count: (68)
  • Needs to get out more...
  • *****
  • Posts: 3262
  • Gender: Male
Re: Manfrotto extension pole and super clamp setup
« Reply #12 on: June 25, 2019, 08:09:24 PM »
i did pick up the 099b poles but those are way overkill for me, the 122b is a much better fit imo, will be getting those instead

https://www.bhphotovideo.com/c/product/5359-REG/Manfrotto_122B_122B_Adjustable_Pole_for.html#!

I found the 099b to be way too much for me to. It’s really like having a full stand without the tripod base. Probably great for some I’m sure. I picked up the Matthews Baby Extension instead.
Beyerdynamic CK930>Sound Devices MixPre 6

Online BonoBeats

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 736
  • Gender: Male
    • My Band- Funk Pocket
Re: Manfrotto extension pole and super clamp setup
« Reply #13 on: June 25, 2019, 11:39:50 PM »
im about to order a new superclamp and pole for redrocks

does the 035RL work with the pole out of the box or do i need the 036 stud mentioned

https://www.amazon.com/Manfrotto-035RL-Super-Clamp-Standard/dp/B0018LQVIA

will that clamp on the 1.5-2" rail at red rocks. last year i remember one taper had something burlier that looked like a vise

SuperClamp will work at Red Rocks. I do have a 4" clamp for other situations, but not necessary in this case.

https://www.bhphotovideo.com/c/product/1179094-REG/kupo_kg602912_super_viser_clamp_with.html?ap=y&gclid=EAIaIQobChMI5MWPiPuE4wIVCv5kCh1rHQPxEAQYAiABEgIPnfD_BwE&smp=y

That's a nice clamp. does a rapid adaptor fir on the end?

Yup.
Now You See Me Telefunken M60 Masters>MixPre6
Now You Don't    Naiant XX>SP-SB10>Roland R05

Offline aaronji

  • Site Supporter
  • Trade Count: (8)
  • Needs to get out more...
  • *
  • Posts: 2812
Re: Manfrotto extension pole and super clamp setup
« Reply #14 on: June 26, 2019, 07:33:33 AM »
i did pick up the 099b poles but those are way overkill for me, the 122b is a much better fit imo, will be getting those instead

https://www.bhphotovideo.com/c/product/5359-REG/Manfrotto_122B_122B_Adjustable_Pole_for.html#!

I have both, but I almost always use the 122b for the same reason. In fact, I am not even sure where the 99b is at the moment.

Actually, I have two 122b's and two SuperClamps for when I want to run spaced omnis. Much easier, and more flexible, than trying to use a long bar on a single clamp and pole. I also have a pair of the 003 bases; coupled with the 122b's they make great low-profile on-stage stands.

 

RSS | Mobile
Page created in 0.058 seconds with 57 queries.
© 2002-2020 Taperssection.com
Powered by SMF