Become a Site Supporter and Never see Ads again!

Author Topic: SP-SPSB-6 Battery Module  (Read 801 times)

0 Members and 1 Guest are viewing this topic.

Offline scottE

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 18
SP-SPSB-6 Battery Module
« on: June 26, 2019, 02:55:02 AM »
Is it technical possible (and working) to use a (smaller) 6V battery instead of the standard 9V battery with this battery module?

Reason is that the batterybox now feels quitte bulky next to the pcm-a10.

« Last Edit: June 26, 2019, 09:50:31 AM by scottE »
SP-BMC-12
SP-SPSB-6

PCM-A10

Offline jerryfreak

  • Trade Count: (27)
  • Needs to get out more...
  • *****
  • Posts: 2732
  • I'm a llama! (taboot)
Re: SP-SPSB-6 Battery Module
« Reply #1 on: June 27, 2019, 04:35:07 AM »
depends what mics. 6V should power most
in:
small: MK4/4V > CMR > V3 or J.Williams Mod MicMan Jr or no pre at all >AD2K/R07/PCM-A10/Oade Warm 661/DR100-MKIII

smaller: 4061/4099 CORE or 4011/4018V> d:vice MMA



out:
home:Benchmark DAC1 HDR > Dynaudio BM15A active monitors
shop: Musical Fidelity VLink 192 Asynchronyous> coax> DAC1 > Rokit RP8 active monitors

Offline scottE

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 18
Re: SP-SPSB-6 Battery Mo
« Reply #2 on: June 27, 2019, 11:24:06 AM »
Ok if 6V powers most microphones then i will try and do a test setup.

Have both SP and OKM mics.
SP-BMC-12
SP-SPSB-6

PCM-A10

Offline ilduclo

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 5985
Re: SP-SPSB-6 Battery Module
« Reply #3 on: June 27, 2019, 12:32:07 PM »
I'd ask Soundpros, too. And test it out ???

Offline scottE

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 18
Re: SP-SPSB-6 Battery Module
« Reply #4 on: June 28, 2019, 11:30:13 AM »
I'd ask Soundpros, too. And test it out ???

That's a good plan to start with !
SP-BMC-12
SP-SPSB-6

PCM-A10

 

RSS | Mobile
Page created in 0.074 seconds with 47 queries.
© 2002-2019 Taperssection.com
Powered by SMF