Become a Site Supporter and Never see Ads again!

Author Topic: How to place mics in a cap...  (Read 2926 times)

0 Members and 1 Guest are viewing this topic.

Offline gewwang

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 6254
Re: How to place mics in a cap...
« Reply #15 on: July 12, 2019, 09:34:09 PM »
If stealth isn't supposed to be discussed here, why are there threads like this?

http://taperssection.com/index.php?topic=189829.30

Shouldn't we also be telling people not to post that they taped Tool and openly sharing links to torrents since Tool is one of the more anti-taping artists?

Offline morst

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 3990
  • (see snopes.com for more info)
Re: How to place mics in a cap...
« Reply #16 on: July 12, 2019, 11:27:09 PM »
If stealth isn't supposed to be discussed here, why are there threads like this?

http://taperssection.com/index.php?topic=189829.30

Shouldn't we also be telling people not to post that they taped Tool and openly sharing links to torrents since Tool is one of the more anti-taping artists?
Don't be disingenuous. That's so folks can find out about the shows. It's not showing them how to hide their shit to beat the door.
hey now!

Offline gewwang

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 6254
Re: How to place mics in a cap...
« Reply #17 on: July 13, 2019, 12:54:40 AM »

Don't be disingenuous. That's so folks can find out about the shows. It's not showing them how to hide their shit to beat the door.

I'm not being "disingenuous". People on that thread openly mocking Tool's security and their intolerance of being taped then talking about how their experience taping them went. If Tool's security is on this site scanning for tapers, you don't think they'd open a thread with their band's name in the Subject?

They're as likely to open that thread than one titled "How to place mics in a cap...".
« Last Edit: July 13, 2019, 12:56:15 AM by gewwang »

Offline morst

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 3990
  • (see snopes.com for more info)
Re: How to place mics in a cap...
« Reply #18 on: July 13, 2019, 03:12:28 AM »
I don't feel it's the same level. Obviously our opinions differ.
hey now!

Offline TheMetalist

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 307
  • Sverige/Sweden/Suède
Re: How to place mics in a cap...
« Reply #19 on: July 13, 2019, 10:41:29 AM »
We all have opinions how open we should be with stealth tips and trix.

At Tapers Section we more or less have a policy that these things should be discussed in pm. It's well known among the regular members here. I personally believe that every forum policy should be followed 100% whatever the topic is. There's no reason to throw flames at each other. It is what is and Tapers Section is a wonderful place to be. Don't ruin that.
It's not about fancy equipment. It's about the thrill, passion and hard work. Liberate the music!

"The music is your passport - Your magic key - To all the madness that awaits you." B.L. '86

Offline heathen

  • Trade Count: (23)
  • Needs to get out more...
  • *****
  • Posts: 2859
Re: How to place mics in a cap...
« Reply #20 on: July 14, 2019, 12:29:50 PM »
Saying something has/can be done is not the same as saying how it's done.
Recordings on LMA: https://archive.org/search.php?query=taper%3A%22Lucas+Lorenz%22
Mics: AT4050ST | AT4031 | AT853 (C/SC) | Line Audio CM3 | Sennheiser e614 | Sennheiser MKE2 | DPA 4061 | CA-14 omni Pres: CA9200 | DPA d:vice Decks: Zoom F8 | Roland R-05

Offline MakersMarc

  • Trade Count: (15)
  • Needs to get out more...
  • *****
  • Posts: 3862
  • Gender: Male
  • 😈
Re: How to place mics in a cap...
« Reply #21 on: July 14, 2019, 01:11:50 PM »
Jesus this ain’t hard. Find a prolific 😈 taper via lockdown, and send a PM. I’ve gotten tons of PMs about this subject, and hopefully steered folks the right way.
😈 Mk4v/41v>nbob actives>Baby nbox>Oade warm mod Marantz 620.

Open: 4v/41v>nbobs>Nicky mod Naiant PFA>Oade warm mod 661.

Home: the Stereo Hospital budget refurb rig: Lappie>DragonFly Cobalt/Red with Jitterbug>Nikko NR520 amp>B&W V202 speakers.

Offline jerryfreak

  • Trade Count: (29)
  • Needs to get out more...
  • *****
  • Posts: 3948
  • the data guy
Re: How to place mics in a cap...
« Reply #22 on: July 15, 2019, 07:55:13 PM »
Saying something has/can be done is not the same as saying how it's done.

this

i was always known for my technique but you do one or two pornos and suddenly everyone is rippin off your moves
team schoeps, dpa, benchmark, and zoom mostly... subject to change without warning

Offline mrfender

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 208
Re: How to place mics in a cap...
« Reply #23 on: July 15, 2019, 08:15:53 PM »
Saying something has/can be done is not the same as saying how it's done.

this

i was always known for my technique but you do one or two pornos and suddenly everyone is rippin off your moves

The pinch, the swirl, the knuckle or the stop short ?
DR-01, DR-05, DR-22wl, DR-44, PCM-M10, Roland R-07
CA-11& CA-14 omnis, CA-14 cards, at853 cards

 

RSS | Mobile
Page created in 0.045 seconds with 51 queries.
© 2002-2020 Taperssection.com
Powered by SMF