Become a Site Supporter and Never see Ads again!

Author Topic: SP-SPSB-11 with Church audio mics  (Read 1166 times)

0 Members and 1 Guest are viewing this topic.

Offline one8ung

  • Trade Count: (2)
  • Taperssection Regular
  • **
  • Posts: 140
  • Gender: Male
    • http://one8ung.jimdo.com/
SP-SPSB-11 with Church audio mics
« on: July 28, 2019, 01:32:26 PM »
Can i run a pair of CA-11 mics on a 12volt SP-SPSB-11
« Last Edit: July 28, 2019, 02:17:21 PM by one8ung »
Mics: CA-11(c) - CA-11(o) - OKM II

Power: A3 - CA-UBB

Recorders: (2x) Roland R-07

Video: Sony HX50V

Website: http://one8ung.jimdo.com/

Offline one8ung

  • Trade Count: (2)
  • Taperssection Regular
  • **
  • Posts: 140
  • Gender: Male
    • http://one8ung.jimdo.com/
Re: SP-SPSB-11 with Church audio mics
« Reply #1 on: July 28, 2019, 02:32:24 PM »
Just contacted chris church and he said it’s slightly to much volts.
Mics: CA-11(c) - CA-11(o) - OKM II

Power: A3 - CA-UBB

Recorders: (2x) Roland R-07

Video: Sony HX50V

Website: http://one8ung.jimdo.com/

Offline kuba e

  • Site Supporter
  • Trade Count: (1)
  • Taperssection Member
  • *
  • Posts: 250
  • Gender: Male
Re: SP-SPSB-11 with Church audio mics
« Reply #2 on: July 30, 2019, 02:19:35 PM »
I think you can put some small resistor in the microphone jack to drop 12V down. I remember Chris said that Ca11 has current consumption less than 1mA with 9V battery box.  Maybe Chris or someone who knows electronics could advise you the resistor size.
« Last Edit: July 30, 2019, 02:25:25 PM by kuba e »

Offline Ziggz

  • Trade Count: (12)
  • Taperssection Member
  • ***
  • Posts: 474
Re: SP-SPSB-11 with Church audio mics
« Reply #3 on: July 30, 2019, 06:15:51 PM »
Just contacted chris church and he said it’s slightly to much volts.
Interesting. When I bought mine way back when they were called CA-STC-11 he said 12v was OK.

Offline Chrisedge

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 413
Re: SP-SPSB-11 with Church audio mics
« Reply #4 on: August 30, 2019, 01:36:37 PM »
I would also spring for one of these battery boxes if it could be used with CA-14's (Both Omnis/Cards)

I am really wanting a new TINY battery box. Make things simpler and smaller.
Audio: Sound Professionals SP-CMC-10 (AT933s) or Church Audio CA-14 (Omni & Cards) Mics >
Sound Professionals Battery Box SP-SPSB-1, SP-SPSB-10 or Church Audio Preamp CA9200 >
Sony PCM-A10, Sony PCM-M10, Tascam DR-2d Recorders
Video: Panasonic DCM-ZS100 & GoPro 7 Black

Offline Chrisedge

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 413
Re: SP-SPSB-11 with Church audio mics
« Reply #5 on: September 22, 2019, 07:32:22 PM »
So can anyone confirm that this will damage the Church mics? I have both 9v power and the tiny 12v option and would love to know it won't hurt the Church CA-14's. I pinged Chris too, and got no answer. (Typical)

Anyone successfully running 12v into CA-14s?
Audio: Sound Professionals SP-CMC-10 (AT933s) or Church Audio CA-14 (Omni & Cards) Mics >
Sound Professionals Battery Box SP-SPSB-1, SP-SPSB-10 or Church Audio Preamp CA9200 >
Sony PCM-A10, Sony PCM-M10, Tascam DR-2d Recorders
Video: Panasonic DCM-ZS100 & GoPro 7 Black

Offline audBall

  • Trade Count: (36)
  • Needs to get out more...
  • Posts: 5975
  • Gender: Male
Re: SP-SPSB-11 with Church audio mics
« Reply #6 on: September 22, 2019, 08:13:00 PM »
Chris from SP recently informed me that you can use the mini-9V batteries (25A, 29A, 32A types) in the SP-SPSB-10 (normally 12v also).

This might also work for the -11.
akg ck61/62/63/77(c577)|naiant.pfa, dpa smk-sc4061 
lunatec v2, mma-a d:vice, mma-6000
edirol-r44(ocm), sony pcm-m10,-d100

PISO akg nbob cables

Offline rhinowing

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 4066
  • Gender: Male
    • SPLRA - Smashing Pumpkins Live Recording Association
Re: SP-SPSB-11 with Church audio mics
« Reply #7 on: September 23, 2019, 06:08:06 AM »
The 11 is just the 10 with switchable rolloff. I've run Ca-11s into both models with no issues.
Please contact me if you've ever taped the Smashing Pumpkins or a related group!

Offline Chrisedge

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 413
Re: SP-SPSB-11 with Church audio mics
« Reply #8 on: October 01, 2019, 06:12:14 PM »
FYI, I ran the SP-SPSB-10 last night with Church Audio CA-14 Cards and had no issues.
Audio: Sound Professionals SP-CMC-10 (AT933s) or Church Audio CA-14 (Omni & Cards) Mics >
Sound Professionals Battery Box SP-SPSB-1, SP-SPSB-10 or Church Audio Preamp CA9200 >
Sony PCM-A10, Sony PCM-M10, Tascam DR-2d Recorders
Video: Panasonic DCM-ZS100 & GoPro 7 Black

Offline spyder9

  • Trade Count: (75)
  • Needs to get out more...
  • *****
  • Posts: 12727
  • Gender: Male
  • "Are you Zman?"
    • My Archived shows
Re: SP-SPSB-11 with Church audio mics
« Reply #9 on: October 07, 2019, 03:51:12 PM »
FYI, I ran the SP-SPSB-10 last night with Church Audio CA-14 Cards and had no issues.

I'll double up.  I've used the SP-SPSB-10 with DPA 4061's and had no issues.

 

RSS | Mobile
Page created in 0.118 seconds with 51 queries.
© 2002-2019 Taperssection.com
Powered by SMF