Become a Site Supporter and Never see Ads again!

Author Topic: frequency response of high pass filter  (Read 379 times)

0 Members and 1 Guest are viewing this topic.

Offline jerryfreak

  • Trade Count: (26)
  • Needs to get out more...
  • *****
  • Posts: 2713
  • I'm a llama! (taboot)
frequency response of high pass filter
« on: August 14, 2019, 03:02:59 AM »
the DPA d:vice has an "80 Hz second order highpass filter", thats all the spec given, no slope

from what i gather, 80 Hz is where it should be 3 dB down. does "second order" tell us anything about the slope? trying to model with graphic EQ in soundforge to hear what it should sound like
in:
small: MK4/4V > CMR > V3 or J.Williams Mod MicMan Jr or no pre at all >AD2K/R07/PCM-A10/Oade Warm 661/DR100-MKIII

smaller: 4061/4099 CORE or 4011/4018V> d:vice MMA



out:
home:Benchmark DAC1 HDR > Dynaudio BM15A active monitors
shop: Musical Fidelity VLink 192 Asynchronyous> coax> DAC1 > Rokit RP8 active monitors

Offline EmRR

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 330
    • ElectroMagnetic Radiation Recorders
Re: frequency response of high pass filter
« Reply #1 on: August 14, 2019, 07:01:22 AM »
2nd order tells us 12dB/oct
Mics: DPA 4060 w/MPS 6030 PSU/DAD6001/DAD4099, Neumann KM 131, KMR 81i, Oktava MK 012, Sennheiser MKH 105, MKH 20, MKH 30, MKH 40, MKH 800 TWIN, lots of other studio appropriate choices
Recorders: Zoom F8n, Sony MZ-R50, portable MOTU based multitrack DAW for client work

Offline jerryfreak

  • Trade Count: (26)
  • Needs to get out more...
  • *****
  • Posts: 2713
  • I'm a llama! (taboot)
Re: frequency response of high pass filter
« Reply #2 on: August 15, 2019, 05:14:02 PM »
so -3dB at 80 Hz, -15 dB at 40 Hz, -28 dB at 20 Hz?
in:
small: MK4/4V > CMR > V3 or J.Williams Mod MicMan Jr or no pre at all >AD2K/R07/PCM-A10/Oade Warm 661/DR100-MKIII

smaller: 4061/4099 CORE or 4011/4018V> d:vice MMA



out:
home:Benchmark DAC1 HDR > Dynaudio BM15A active monitors
shop: Musical Fidelity VLink 192 Asynchronyous> coax> DAC1 > Rokit RP8 active monitors

Offline EmRR

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 330
    • ElectroMagnetic Radiation Recorders
Re: frequency response of high pass filter
« Reply #3 on: August 15, 2019, 09:53:27 PM »
Roughly.  There are some other factors affecting initial slope that might render slight differences, but shouldn’t be much. 
Mics: DPA 4060 w/MPS 6030 PSU/DAD6001/DAD4099, Neumann KM 131, KMR 81i, Oktava MK 012, Sennheiser MKH 105, MKH 20, MKH 30, MKH 40, MKH 800 TWIN, lots of other studio appropriate choices
Recorders: Zoom F8n, Sony MZ-R50, portable MOTU based multitrack DAW for client work

 

RSS | Mobile
Page created in 0.064 seconds with 45 queries.
© 2002-2019 Taperssection.com
Powered by SMF