« on: November 10, 2019, 11:30:16 AM »
Does anyone know if it is possible to make a dual mini-xlr cable to a stereo 1/8" with the 4.7k mod in that interconnect?
I ask because I have a pair of AT933s w/ AT853 SC caps that currently terminate in mini-XLR and have a specific interconnect of dual mini-XLR to 6-Pin that I use with my Tinybox.
I am hoping the above cable is another option I might be able to use so I could run the AT mics into my PIPsqueak using an 1/8" connector with the 4.7k mod in it to avoid distortion.
All this in a effort to keep making my lopro gear smaller with the versatility of using two different preamps and all the while keeping the mini-XLR connectors on the mics. Hopefully that makes sense!?!?
Any info is greatly appreciated!
Ryan
Logged
AKG 481's, DPA 4061's (Matched), AT ES933's w/ AT853-ELE's (SC/C/O), ECM-19B's, MixPre-3, A10, M10 x 2, Hi Ho Silvers, Various Darktrain & GAKables
Vinyl:
Fluance RT83 Reference > MCS 3230 Receiver > Realistic MC-500's (NOS)
Upcoming:
05/04 Harry Mack (?)
05/10 Adam Bodine Quartet
06/07 Bill Frisell Trio
06/08 Common
06/19 Sensational Barnes Brothers
06/20 Adam Bodine Quintet
07/19 Chali 2na & Cut Chemist
07/30 Tomorrows Bad Seeds