Become a Site Supporter and Never see Ads again!

Author Topic: Izotope software  (Read 709 times)

0 Members and 1 Guest are viewing this topic.

Offline markbalogh

  • Trade Count: (5)
  • Taperssection Newbie
  • *
  • Posts: 36
  • Gender: Male
Izotope software
« on: December 05, 2019, 05:04:03 PM »
Can someone explain the "de-rustle" feature in Izotope. I occasionally record stealth with mics under my collar and if I move a bit too much I will get a "rustling sound". Will the "de-rustle" feature work on something like that and if so what would the technique be. Thanks.

Offline EmRR

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 472
    • ElectroMagnetic Radiation Recorders
Re: Izotope software
« Reply #1 on: December 05, 2019, 05:20:16 PM »
That's more or less what it's for:  film sound production with actors wearing lavaliers that might rub against clothing.
Mics: DPA 4060 w/MPS 6030 PSU/DAD6001/DAD4099, Neumann KM 131, KMR 81i, Oktava MK 012, Sennheiser MKH 105, MKH 20, MKH 30, MKH 40, MKH 800 TWIN, lots of other studio appropriate choices
Recorders: Zoom F8n, Sony MZ-R50, portable MOTU based multitrack DAW for client work

Offline strangerinusall

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 20
Re: Izotope software
« Reply #2 on: December 08, 2019, 04:10:35 AM »
I experienced good results by using "de-wind" and "spectral repair" modules, too.

Offline markbalogh

  • Trade Count: (5)
  • Taperssection Newbie
  • *
  • Posts: 36
  • Gender: Male
Re: Izotope software
« Reply #3 on: December 10, 2019, 08:01:14 AM »
Another follow up question for all... Do you run the program to scrub the entire file, like you would do w/ the vinyl click/pop remover or is it for "spot" cleaning only? Thanks.

Offline Gordon

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 11302
  • Gender: Male
    • my list
Re: Izotope software
« Reply #4 on: December 10, 2019, 08:07:37 AM »
you've posted the same thread twice.  that is discouraged  :cheers:
Microtech Gefell M20 or M21 > Nbob actives > Naiant PFA > Sound Devices MixPre-6 II

https://archive.org/details/fav-gordonlw

Offline markbalogh

  • Trade Count: (5)
  • Taperssection Newbie
  • *
  • Posts: 36
  • Gender: Male
Re: Izotope software
« Reply #5 on: December 10, 2019, 09:05:22 AM »
Sorry. Just trying to get max exposure and comments (help).


you've posted the same thread twice.  that is discouraged  :cheers:

Offline strangerinusall

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 20
Re: Izotope software
« Reply #6 on: December 10, 2019, 10:42:15 AM »
Another follow up question for all... Do you run the program to scrub the entire file, like you would do w/ the vinyl click/pop remover or is it for "spot" cleaning only? Thanks.
No, I donĀ“t. The issues you are talking about have to be worked on step by step.

Offline EmRR

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 472
    • ElectroMagnetic Radiation Recorders
Re: Izotope software
« Reply #7 on: December 10, 2019, 07:14:35 PM »
De-Bleed, nope.

Point something like a wide cardioid straight down at the talkers around your stand.   Use it as the bleed source to subtract from your main mics......

You can't go very far with it, and it's a slow offline process, but it can make a difference.   Test for sound quality on a very small section before committing to any larger selection. 
Mics: DPA 4060 w/MPS 6030 PSU/DAD6001/DAD4099, Neumann KM 131, KMR 81i, Oktava MK 012, Sennheiser MKH 105, MKH 20, MKH 30, MKH 40, MKH 800 TWIN, lots of other studio appropriate choices
Recorders: Zoom F8n, Sony MZ-R50, portable MOTU based multitrack DAW for client work

 

RSS | Mobile
Page created in 0.106 seconds with 49 queries.
© 2002-2020 Taperssection.com
Powered by SMF