Become a Site Supporter and Never see Ads again!

Author Topic: 2 Schoeps KC5 chopped to a single TA6M  (Read 3632 times)

0 Members and 1 Guest are viewing this topic.

Offline jdwtyl

  • Trade Count: (9)
  • Taperssection Regular
  • **
  • Posts: 224
2 Schoeps KC5 chopped to a single TA6M
« on: February 12, 2020, 09:27:55 PM »
Will anyone on here do this? If so please let me know, thanks a lot!
Schoeps MK22, MK41 - Matched Pairs
Schoeps CMC6 x4, Schoeps CMR - Pair
Naiant Tinybox, Edirol UA-5 (bm2p+), Naiant PFA
Edirol R-44 (OCM), Edirol R-09HR, Tascam DR-2D

Online DSatz

  • Site Supporter
  • Trade Count: (35)
  • Needs to get out more...
  • *
  • Posts: 2955
  • Gender: Male
Re: 2 Schoeps KC5 chopped to a single TA6M
« Reply #1 on: February 13, 2020, 09:20:03 PM »
I'm just curious what you will connect them to. You do know that you can't simply phantom-power a pair of Colette cables, right? They need two specific voltages, a low one for the FET (6.2 Volts if I recall correctly) and about 60 Volts to polarize the capsule, although the latter voltage sees an extremely high impedance--almost no current is required.

--best regards
music > microphones > a recorder of some sort

Offline jdwtyl

  • Trade Count: (9)
  • Taperssection Regular
  • **
  • Posts: 224
Re: 2 Schoeps KC5 chopped to a single TA6M
« Reply #2 on: February 13, 2020, 09:41:34 PM »
Jon said he can build a 60V PFA.
Schoeps MK22, MK41 - Matched Pairs
Schoeps CMC6 x4, Schoeps CMR - Pair
Naiant Tinybox, Edirol UA-5 (bm2p+), Naiant PFA
Edirol R-44 (OCM), Edirol R-09HR, Tascam DR-2D

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40708
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: 2 Schoeps KC5 chopped to a single TA6M
« Reply #3 on: March 31, 2020, 01:55:00 AM »
Id love to see this setup after it completed :)
Schoeps MK 4V & MK 41V ->
Schoeps 250/0 KCY's (x2) ->
Naiant +60v/Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3 ->
SanDisk 128gb Extreme Pro & 64gb Ultra Plus SDXC-I

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline darby

  • Trade Count: (95)
  • Taperssection All-Star
  • ****
  • Posts: 1291
  • Support artists and venues that allow recording
Re: 2 Schoeps KC5 chopped to a single TA6M
« Reply #4 on: March 31, 2020, 01:56:41 AM »
Id love to see this setup after it completed :)

won't happen... he was going to buy mine and they currently are NOT FOR SALE


Offline edtyre

  • Trade Count: (82)
  • Needs to get out more...
  • *****
  • Posts: 2215
  • Gender: Male
  • Team Philly " No Excuses, Just Tapes"
Re: 2 Schoeps KC5 chopped to a single TA6M
« Reply #5 on: June 16, 2020, 05:16:48 PM »
Nicky C modded a set of KC5's for me so i could run them with an Nbox or with a PFA
It's not a simple cable change with the two voltages as D Satz stated.

I have a  PFA for sale if anybody needs
music>mics>pre>recorder

Offline Sebastian

  • Trade Count: (4)
  • Taperssection All-Star
  • ****
  • Posts: 1393
  • Gender: Male
Re: 2 Schoeps KC5 chopped to a single TA6M
« Reply #6 on: June 17, 2020, 05:32:35 AM »
If you have a PFA, modding the KC5s is no real problem. The Schoeps capsule connectors are really easy to open, unlike the NBobs.
Schoeps { MK6 | MK41V | MK4 } > NBob actives > {Naiant Tinybox v2.0 | Naiant IPA | Naiant PFAs} > {Sound Devices MixPre-6 | Sony PCM-A10 | Sony PCM-M10 | Tascam DR-2d}

Recordings:
Live Music Archive | DaD Torrents | TTD Torrents | Etree Torrents

 

RSS | Mobile
Page created in 0.056 seconds with 48 queries.
© 2002-2020 Taperssection.com
Powered by SMF