Become a Site Supporter and Never see Ads again!

Author Topic: stand for my at933's?  (Read 4657 times)

0 Members and 1 Guest are viewing this topic.

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9856
  • Gender: Male
    • shows ive taped  that are in circulation
stand for my at933's?
« on: April 19, 2003, 11:34:14 AM »
well i bought some at933's and will sometimes be using them in open taping for a local jamband i archive for...

the only thing ive found is the stand they have on sp.com that actually goes with those mics

anyone have any suggestions?

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3278
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
Re:stand for my at933's?
« Reply #1 on: April 19, 2003, 12:10:11 PM »
Not for sure what the 933s look like but this is what I use for my 943s.

http://www.soundprofessionals.com/cgi-bin/gold/category.cgi?item=SP-GNA-3&type=store&category=120

-Kevin
« Last Edit: April 19, 2003, 12:10:40 PM by blu666z »

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9856
  • Gender: Male
    • shows ive taped  that are in circulation
Re:stand for my at933's?
« Reply #2 on: April 19, 2003, 04:37:54 PM »
im assuming the 33's and 43's are very similar

what kind of a stand did you use with that t-bar? happen to use the sp stand they have on that same page

it would be 79.00 for thier t-bar and stand, sound like a deal?

Thanks
Dustin

Offline nickgregory

  • Admitted Jeter Homer
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 22386
  • Gender: Male
    • Hurricanes Insider
Re:stand for my at933's?
« Reply #3 on: April 19, 2003, 10:10:25 PM »
im assuming the 33's and 43's are very similar

what kind of a stand did you use with that t-bar? happen to use the sp stand they have on that same page

it would be 79.00 for thier t-bar and stand, sound like a deal?

Thanks
Dustin

So I have one of the sound pro t bars that I dont use.  It is like they show, basically a flex bar, that goes through a AT 8415 shock mount in the middle (this is where the stand connects).  I got it when I bought a set of 853's for stealthing (i.e. why I dont use the mount since I only use these mics for that purpose).  The only thing that would concern me is that the 853's are a bit bigger than the 933's (I believe), which will cause a problem with how they mount.  Let me see if I can explain, at each end of the flex bar is a metal hole about a half inch in diameter, the way you put in the mics in is you put these heavy windscreens that came with the mount through, this fits snuggly with the bar and then stick the mics into the windscreen.  Now the only issue I believe I can see is where the cable comes out of the 933's.  On the 853's it comes out the back so I "plug it straight in."  If the 933's come out the side, that could be an issue.

If your interested in the mount and it sounds like you can use it, let me dig it up and we can probably work something out for it!

Nick

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9856
  • Gender: Male
    • shows ive taped  that are in circulation
Re:stand for my at933's?
« Reply #4 on: April 19, 2003, 10:30:33 PM »
im not exactly sure what the size difference is, but i believe the 933's are smaller

but the cables do come out of the backs of the 933's

anyone know any info that could set us straight, so i could possibly buy the t-bar from him?

i dont see anything else that would affect the usage of it with my 933's. i believe they offer the same t-bar with all the mics on the sp.com page

Offline goose

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 986
  • Gender: Male
Re:stand for my at933's?
« Reply #5 on: April 20, 2003, 12:17:00 AM »
I believe you order the tbars based on which mic capsule is used.  The difference is the windscreen that is supplied with the bar.  Depending on the size of the capsule the opening on the windscreen is bigger or smaller.

If his bar is for the 853s, it may not be a snug fit, but it may work.  You may also be able to buy replacement windscreens that fit the 933s.

HTH

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3278
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
Re:stand for my at933's?
« Reply #6 on: April 20, 2003, 01:31:55 AM »

what kind of a stand did you use with that t-bar?

I've got a 17' Bogen.

-Kevin

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9856
  • Gender: Male
    • shows ive taped  that are in circulation
Re:stand for my at933's?
« Reply #7 on: April 20, 2003, 12:06:18 PM »
l check into getting different windscreens

nickgregory

email me and maybe we can work something out on buying that one you have, if you wanna come off of it, or if you can find it

Offline John Kelly

  • Been a while...
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 9757
  • Gender: Male
    • The Jokell
Re:stand for my at933's?
« Reply #8 on: April 21, 2003, 08:37:31 PM »
I've got a set of 933s, and they fit that tbar just fine.  No need to switch out windscreens...
Sennheiser MKH8040st > SD 702
XBL/PSN/Steam ID: thejokell

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9856
  • Gender: Male
    • shows ive taped  that are in circulation
Re:stand for my at933's?
« Reply #9 on: April 22, 2003, 09:52:45 PM »
thanks for clearing it up john, i bought it by the way

still looking at stands, i dont need anything huge, im looking at a manfrotto 3373 -7 footer


Offline John Kelly

  • Been a while...
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 9757
  • Gender: Male
    • The Jokell
Re:stand for my at933's?
« Reply #10 on: April 22, 2003, 11:50:52 PM »
Just be sure you get the thread adapter for Bogen stands.  The stand will have a 1/4" or something like that and you need a 5/8".  SP sells it, it's this right here:  http://www.soundprofessionals.com/cgi-bin/gold/category.cgi?category=380&item=SP-TMA-1&type=store
Sennheiser MKH8040st > SD 702
XBL/PSN/Steam ID: thejokell

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9856
  • Gender: Male
    • shows ive taped  that are in circulation
Re:stand for my at933's?
« Reply #11 on: April 23, 2003, 05:59:06 PM »
good call!

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9856
  • Gender: Male
    • shows ive taped  that are in circulation
Re:stand for my at933's?
« Reply #12 on: April 23, 2003, 09:19:26 PM »
ok, ive decided to go with something bigger, maybe something i can run at a low height and still have the option to go high, say up to 13" id say

anyone got any reccomendations?

Offline nickgregory

  • Admitted Jeter Homer
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 22386
  • Gender: Male
    • Hurricanes Insider
Re:stand for my at933's?
« Reply #13 on: April 23, 2003, 09:25:56 PM »
ok, ive decided to go with something bigger, maybe something i can run at a low height and still have the option to go high, say up to 13" id say

anyone got any reccomendations?

Go Bogen....I am not sure if this place is the cheapest, but you will get some model numbers

http://www.micsupply.com/standproducts.htm

The greatest thing about the bogen is when you are in tight setups like arenas and sheds, you can leave the thing collapsed, and since it has a flat bottom, set it directly on the ground and duct tape it in between the seat bottoms, and run it high from there.  A hell of alot more practical than setting up in an aisle.

Nick

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9856
  • Gender: Male
    • shows ive taped  that are in circulation
Re:stand for my at933's?
« Reply #14 on: April 23, 2003, 09:54:01 PM »
i ordered a bogen/manfrotto 3078, a 13 footer from bhphoto for 76 and it was like 140 for the same thing at micsupply....

thanks

 

RSS | Mobile
Page created in 0.134 seconds with 56 queries.
© 2002-2020 Taperssection.com
Powered by SMF