Become a Site Supporter and Never see Ads again!

Author Topic: MP-2 DIY Rechargeable Batt Mod  (Read 2418 times)

0 Members and 1 Guest are viewing this topic.

Offline Scooter

  • Trade Count: (2)
  • Taperssection All-Star
  • ****
  • Posts: 1770
  • Gender: Male
MP-2 DIY Rechargeable Batt Mod
« on: March 17, 2005, 07:29:29 PM »
I found out that the reason that the MP-2 doesn't like rechargeable batts is that there is a plastic piece (see pic) on the top of most rechargeable batts that is not on reg batts.  The spring in the bottom of the MP-2 makes contact with the plastic, instead of the batt.  SD replaces the spring with a narrower one.  If you take an exacto or the like and carefully slice off the plastic ring on the top of the batt, the rechargeables now will work.  At least in my case it did, YMMV and try it at your own risk ;)...

« Last Edit: March 17, 2005, 07:36:46 PM by Scooter »
MBHO 603a(ka200n/ka500hn) >
R-44, or H120

LMA Recordings


RSS | Mobile
Page created in 0.045 seconds with 28 queries.
© 2002-2023
Powered by SMF