Become a Site Supporter and Never see Ads again!

Author Topic: Need Windscreens for AT943s  (Read 1004 times)

0 Members and 1 Guest are viewing this topic.

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3278
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
Need Windscreens for AT943s
« on: July 11, 2003, 05:41:54 PM »
After taping my first outdoor show last weekend, I now know I need some nicer windscreens.  I run AT943s in a t-bar that has ring at each end to hold the mics.  Basically, the ring holds the windsceens and then the windscreens hold the mics.  I want to get a big set of windscreens that I could out a slit on one side and then slide that over the end of the t-bar covering the ring, regular screens, and mics.  My questions is what are some good heavy duty screens?

-Kevin
« Last Edit: July 11, 2003, 05:43:12 PM by blu666z »

Offline olyrc

  • Trade Count: (4)
  • Taperssection All-Star
  • ****
  • Posts: 1208
  • Gender: Male
  • I dig music.
    • My tapes on archive.org
Re:Need Windscreens for AT943s
« Reply #1 on: July 11, 2003, 05:49:50 PM »
http://www.sonicsense.com/access.htm

Large windscreens (for 19mm diameter mics) look to me like they'd fit on your setup.

Hope that helps.

-Ryan
digginaditch@hotmail.com
Sonic Studios DSM-6S/L > PA-24 > TASCAM DR-07

 

RSS | Mobile
Page created in 0.116 seconds with 29 queries.
© 2002-2018 Taperssection.com
Powered by SMF