Become a Site Supporter and Never see Ads again!

Author Topic: "UA5 Soundboard Feed ?"  (Read 823 times)

0 Members and 1 Guest are viewing this topic.

Offline rowjimmytour

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 3776
  • Gender: Male
    • My LMA bookmarks
"UA5 Soundboard Feed ?"
« on: November 08, 2005, 03:42:31 PM »
When you go rca in the back of a UA5 w/ a sound board feed. Where should the little gain be at in the back to start off? I am thinking half way (12:00) would be a good start. Also if you don't do matrix would it be better to go in the XLR plug  w/ a 1/4" plug so you can control the gain better.
Peace
http://www.archive.org/bookmarNo
And the trees are all kept equal
By hatchet, axe and saw

Offline Craig T

  • Trade Count: (8)
  • Needs to get out more...
  • *****
  • Posts: 4229
    • LMA
Re: "UA5 Soundboard Feed ?"
« Reply #1 on: November 08, 2005, 03:54:23 PM »
I think unity for the rca line input is somewhere between 1 & 2 o'clock.  I'd start at 1, but 12 is fine, too.
Schoeps cmc6/4v / Line Audio CM3, OM1 / ADK A51 / Church Audio CA-14
Naiant Tinybox v2.2 / NBox(P) / Apogee Mini-MP / Church Audio ST9200 / CA-UGLY
Sony PCM-M10 / Tascam DR-70D

Offline rowjimmytour

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 3776
  • Gender: Male
    • My LMA bookmarks
Re: "UA5 Soundboard Feed ?"
« Reply #2 on: November 08, 2005, 06:19:54 PM »
Thanks, +t to ya.
peace
http://www.archive.org/bookmarNo
And the trees are all kept equal
By hatchet, axe and saw

 

RSS | Mobile
Page created in 0.128 seconds with 30 queries.
© 2002-2017 Taperssection.com
Powered by SMF
Website Design by Foxtrot Media, Inc., a Baltimore Website Company