Become a Site Supporter and Never see Ads again!

Author Topic: Powering a UA-5 and/or JB3  (Read 1319 times)

0 Members and 1 Guest are viewing this topic.

Offline TheWildKindness

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 316
  • Gender: Male
    • Archivist Records
Powering a UA-5 and/or JB3
« on: February 05, 2006, 08:02:04 PM »
« Last Edit: February 05, 2006, 08:12:12 PM by TheWildKindness »
For Sale: (BM2p+ mod) UA-5 & 20 GB JB3 -

Stealth: AT831's > SP-SPSB-1 > JB3

Open: (BM2p+ mod) UA-5 > JB3
Extras: Sharp MD-DR480

Offline dgodwin

  • ...
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2901
  • Gender: Male
  • AT4041->Tascam DR-100mkiii
Re: Powering a UA-5 and/or JB3
« Reply #1 on: February 05, 2006, 08:29:46 PM »
what you need to power both the jb3 and a UA5 together is a voltage regulator box.  You can put one together on your own for about $20ish in parts from radio shack, or get a nice one from Todd R.  You'll also need a battery source.  Most people use the "walmart" battery which, in most cases, is a 9v litium Ion battery designed to power portable dvd batteries.  You can get them on ebay fairly cheap.  Do a search for "esa dvd battery" or "memorex dvd battery" or "initial dvd battery" and you'll likely come up with some sources.  This has been discussed at length in other threads.  the button is your friend. 


RSS | Mobile
Page created in 0.032 seconds with 43 queries.
© 2002-2020
Powered by SMF