Become a Site Supporter and Never see Ads again!

Author Topic: NOS vs. DIN  (Read 3782 times)

0 Members and 1 Guest are viewing this topic.

Offline Joe w.

  • esniper
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5035
  • Gender: Male
  • Turn JB Up
NOS vs. DIN
« on: August 22, 2003, 01:46:21 PM »
I have yet to run NOS with my mbho's. seems it would fatten up the bottom end a bit at close distances. i would not try it from far back, but was wondering what some of you think. I tend to run a modded din (17cm) if i feel i'm too far away. i like the sound, but i think ortf sounds a little fatter. seems that NOS would sound similar to ortf in that 'no mans land' thats not far enough for the 17 cm din and not close enough for ortf. make sense?

discuss.
2016 National Champions
five generations with an unlocked door and a loaded burglar alarm

DaryanLenz

  • Guest
  • Trade Count: (0)
Re:NOS vs. DIN
« Reply #1 on: August 22, 2003, 02:03:56 PM »
I use to run nos with mbho 440's and loved the wide open sound of it.  Never did it inside, always outside though!

Daryan

wrangler_n_space

  • Guest
  • Trade Count: (0)
Re:NOS vs. DIN
« Reply #2 on: August 22, 2003, 02:04:10 PM »
I am going to try nos for the first time tonight.
I'll be about 20ft back for the allstars at a medium sized bar.


Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (27)
  • Needs to get out more...
  • *****
  • Posts: 18850
  • Gender: Male
Re:NOS vs. DIN
« Reply #3 on: August 22, 2003, 02:10:44 PM »
If you're up front, I think the MBHOs - and a lot of mics, really - will sound great in NOS.
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline Joe w.

  • esniper
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5035
  • Gender: Male
  • Turn JB Up
Re:NOS vs. DIN
« Reply #4 on: August 22, 2003, 02:22:20 PM »
taping Rusted Root tonight at the township in columbia. practice for panic.:) May give it a shot if i get close.
2016 National Champions
five generations with an unlocked door and a loaded burglar alarm

rabhan

  • Guest
  • Trade Count: (0)
Re:NOS vs. DIN
« Reply #5 on: August 22, 2003, 02:45:08 PM »
NOS = ?cm/in 90d  

wrangler_n_space

  • Guest
  • Trade Count: (0)
Re:NOS vs. DIN
« Reply #6 on: August 22, 2003, 02:47:04 PM »
30cm right

Offline Joe w.

  • esniper
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5035
  • Gender: Male
  • Turn JB Up
Re:NOS vs. DIN
« Reply #7 on: August 22, 2003, 02:47:38 PM »
NOS = 30cm/90º
2016 National Champions
five generations with an unlocked door and a loaded burglar alarm

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (27)
  • Needs to get out more...
  • *****
  • Posts: 18850
  • Gender: Male
Re:NOS vs. DIN
« Reply #8 on: August 22, 2003, 02:47:44 PM »
NOS = ?cm/in 90d  

30cm.  For the conversion to inches, go here:

www.onlineconversions.com

I'm feeling lazy.
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

rabhan

  • Guest
  • Trade Count: (0)
Re:NOS vs. DIN
« Reply #9 on: August 22, 2003, 02:50:33 PM »
i need to get a protractor or something less geekie to measure my shit.....recommendations?

Offline EScott

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 738
  • Gender: Male
Re:NOS vs. DIN
« Reply #10 on: August 22, 2003, 02:52:38 PM »
"i need to get a protractor or something less geekie to measure my shit.....recommendations? "

Switch to Schoeps and use Mr. Kwon's bars... ;D
"You know the type loud as a motor bike
But wouldn't bust a grape in a fruit fight"

Offline Joe w.

  • esniper
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5035
  • Gender: Male
  • Turn JB Up
Re:NOS vs. DIN
« Reply #11 on: August 22, 2003, 02:55:45 PM »
jon,

from my thumb to my index finger (hand spread, from center of thumb tip to finger tip) is 17 cm.

from my thumb to my middle finger (hand spread, from center of thumb tip to finger tip) is 20 cm.

works great on my hands. now check your own!
2016 National Champions
five generations with an unlocked door and a loaded burglar alarm

Offline goose

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 986
  • Gender: Male
Re:NOS vs. DIN
« Reply #12 on: August 22, 2003, 04:22:09 PM »
don't worry, some girls like small hands joe   :yack:


j/k!!   :scared:

rabhan

  • Guest
  • Trade Count: (0)
Re:NOS vs. DIN
« Reply #13 on: August 22, 2003, 05:21:03 PM »
i have nothing to measure cm with.

Offline danmorgan

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1346
  • Gender: Male
Re:NOS vs. DIN
« Reply #14 on: August 22, 2003, 05:23:05 PM »
2.54 cm = 1 in

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (27)
  • Needs to get out more...
  • *****
  • Posts: 18850
  • Gender: Male
Re:NOS vs. DIN
« Reply #15 on: August 22, 2003, 05:23:11 PM »
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

rabhan

  • Guest
  • Trade Count: (0)
Re:NOS vs. DIN
« Reply #16 on: August 22, 2003, 05:46:46 PM »
aaaaarrrgghhh, i need something to measure with!

Offline Joe w.

  • esniper
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5035
  • Gender: Male
  • Turn JB Up
Re:NOS vs. DIN
« Reply #17 on: August 22, 2003, 05:54:20 PM »
Quote
don't worry, some girls like small hands joe  

Ha. I set myself up for that one eh.

conversions:
17cm = 6.69"
20cm = 7.87"
30cm = 11.81"

http://personal.zcloud.net/easysurf/cnvert.htm#ci2
2016 National Champions
five generations with an unlocked door and a loaded burglar alarm

Offline Kindguy

  • Team Bama
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 6392
  • Gender: Male
Re:NOS vs. DIN
« Reply #18 on: August 24, 2003, 01:52:55 PM »
I just picked up a tape mesure with inches on 1 side & cm on the other. 99 cents.

Got it from a frabric store.
TDS!

DPA 4023> aeta PSP-2> Apogee Mini Me > R-44

http://www.basicallyfrightened.com/

Offline Kindguy

  • Team Bama
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 6392
  • Gender: Male
Re:NOS vs. DIN
« Reply #19 on: August 24, 2003, 01:56:45 PM »
A dollar bill is slightly over 15.5 cm
TDS!

DPA 4023> aeta PSP-2> Apogee Mini Me > R-44

http://www.basicallyfrightened.com/

Tim

  • Guest
  • Trade Count: (0)
Re:NOS vs. DIN
« Reply #20 on: August 24, 2003, 08:51:42 PM »
A dollar bill is slightly over 15.5 cm

what if all I've got is $5's?   ???


 ;) ;)

that's pretty useful.

Offline zhianosatch

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8995
  • Gender: Male
  • god-damned hippies!
Re:NOS vs. DIN
« Reply #21 on: August 25, 2003, 02:15:51 PM »
i have nothing to measure cm with.

!!!
jon... c'mon now...

Offline Simp-Dawg

  • Bad Little Dawggie
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 15085
  • Gender: Male
  • Daddy needs a drink!
    • Colorado Tapers
Re:NOS vs. DIN
« Reply #22 on: August 25, 2003, 03:19:16 PM »
i need to get a protractor or something less geekie to measure my shit.....recommendations?

well...for a cheap ruler, search online, i found a teacher's tools website that had a ruler and a protractor that you could print out on it, and it worked out...
then what i did to use as a guide for mic placement, is a made a right angled triangle cut out out of a manila folder with 20cm hypotenuse, i keep that cutout in my case and it's wuick and easy to set up the mics DIN with it.  got that idea from some dude at hampton i saw using one.
CO Crüe Benchwarmer

Playback: Denon DVD-2910 > Denon AVR-3806 > Segue Doghouse Speaker Cable > B&W DM-610i / Klipsch RW-10 Subwoofer

Offline Sean Gallemore

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 8319
Re:NOS vs. DIN
« Reply #23 on: August 26, 2003, 04:40:57 AM »
jon,

from my thumb to my index finger (hand spread, from center of thumb tip to finger tip) is 17 cm.

from my thumb to my middle finger (hand spread, from center of thumb tip to finger tip) is 20 cm.

works great on my hands. now check your own!

that's how I measure my dick! it's short, I know :(

 

RSS | Mobile
Page created in 0.223 seconds with 51 queries.
© 2002-2018 Taperssection.com
Powered by SMF