Become a Site Supporter and Never see Ads again!

Author Topic: Bumblebee VR Box and Walmart Li-Ion batteries - need cable help  (Read 941 times)

0 Members and 1 Guest are viewing this topic.

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3278
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
I am currently running 3000mah 9.6v RC packs into a Bumblebee VR box that is powering my UA-5 and JB3.  Think my RC packs are starting to hold less and less of a charge.  Missed the second set of WSP this weekend because of them....anyway, I'm thinking the WalMart batteries are gonna be the best step for me. 

Anybody wanna build me the cable I'm gonna need between WalMart battery and the VR box?

-Kevin

Offline Scooter

  • Trade Count: (2)
  • Taperssection All-Star
  • ****
  • Posts: 1771
  • Gender: Male
Re: Bumblebee VR Box and Walmart Li-Ion batteries - need cable help
« Reply #1 on: July 17, 2006, 02:44:51 PM »
you could also go to radio shack and get two of the adaptaplug cables, and just solder them together.  switchable tips on each end.
MBHO 603a(ka200n/ka500hn) >
R-44, or H120

LMA Recordings

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3278
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
Re: Bumblebee VR Box and Walmart Li-Ion batteries - need cable help
« Reply #2 on: July 17, 2006, 03:13:19 PM »
Maybe I need to pull the VR box out and take a look at it, but I thought I remembered the input side being an XLR.

-Kevin

Offline terrapinj

  • Jonesin' for Tunes
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 6562
  • Gender: Male
Re: Bumblebee VR Box and Walmart Li-Ion batteries - need cable help
« Reply #3 on: July 17, 2006, 03:46:41 PM »
you can probably use the same cable and just change the ends from the RC Tamaiya connectors to the ends that fit into the Li-Ion batteries. maybe contact ed at KindKables if you don't want to do the work yourself, he may even be able to make you an entirely new cable for reasonable amount.

it should be a 4-pin XLR that connects to the box itself
JW mod AKG 460b (ck61/ck63 or mk46/ck1x/ck3x)>  EAA PSP-2 > 722

Segue Dogstar XLRs and Interconnects

ISO: (2) ck2x

 

RSS | Mobile
Page created in 0.08 seconds with 31 queries.
© 2002-2019 Taperssection.com
Powered by SMF