Become a Site Supporter and Never see Ads again!

Author Topic: V3 battery's?  (Read 1009 times)

0 Members and 1 Guest are viewing this topic.

Offline ts

  • Trade Count: (64)
  • Needs to get out more...
  • *****
  • Posts: 3182
  • Gender: Male
V3 battery's?
« on: August 12, 2006, 04:17:04 PM »
My 7.2V 5400 mah Wally's are getting old. Are the 9V 6000's compatible? Same type of battery.
Beyerdynamic CK930>Sound Devices MixPre 6

Offline terrapinj

  • Jonesin' for Tunes
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 6562
  • Gender: Male
Re: V3 battery's?
« Reply #1 on: August 12, 2006, 04:27:15 PM »
i've used bothe the 7.2 and 9v with my v2 with no problems, as long as its between 6v and 12v you should be fine, except the low voltage indicator won't function the same
JW mod AKG 460b (ck61/ck63 or mk46/ck1x/ck3x)>  EAA PSP-2 > 722

Segue Dogstar XLRs and Interconnects

ISO: (2) ck2x

Offline JasonSobel

  • Trade Count: (8)
  • Needs to get out more...
  • *****
  • Posts: 3329
  • Gender: Male
    • My show list
Re: V3 battery's?
« Reply #2 on: August 12, 2006, 04:28:09 PM »
sure, the V3 will run off anything from 6v to 12v (as long as it's calibrated for 6V.  if it's calibrated for 12V, than 7.2 or 9 will be below the cut-off and it won't run on).  but if you've been running it on 7.2V already, you should have no trouble running it from 9V...

Offline ts

  • Trade Count: (64)
  • Needs to get out more...
  • *****
  • Posts: 3182
  • Gender: Male
Re: V3 battery's?
« Reply #3 on: August 12, 2006, 04:29:48 PM »
Thanks. Thats what I thought. Off to ratshack. I have some discount coupons :)
Beyerdynamic CK930>Sound Devices MixPre 6

 

RSS | Mobile
Page created in 0.115 seconds with 31 queries.
© 2002-2019 Taperssection.com
Powered by SMF