Become a Site Supporter and Never see Ads again!

Author Topic: Repairing LiIon used in SD 7xx's  (Read 1339 times)

0 Members and 1 Guest are viewing this topic.

Offline boojum

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3633
  • Gender: Male
Repairing LiIon used in SD 7xx's
« on: July 19, 2007, 12:22:06 AM »
I got a cheapo NP-F970 from 1800??? and the cap with the two tube terminals which slide onto the pins in the SD pulled off.  When it did it broke the connectors between the cap and the cells inside.  Has anyone ever had luck with re-attaching these two pieces?  How is it done?

Thanks.

Cheers
Nov schmoz kapop.

Offline gratefulphish

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1568
  • Gender: Male
  • Gone Tapin'
Re: Repairing LiIon used in SD 7xx's
« Reply #1 on: July 22, 2007, 09:26:21 PM »
You probably want to buy a new battery.  I have been using the knock off Synergy versions, which come with a 3 year warranty, and so far, [knockin] wood[/knocking] they have held together, and hold a good charge.
4 channel: Neumann TLM-170R>Segue Dogstar>SD 722   2 channel: Neumann TLM-170R>Segue Dogstar>Lunatec V3>SD 722
               Linked to Lunatec V3>MT 24/96                                     (Hi-Ho Silver Interconnects)     

Other gear: AKG C451Es, Tascam DA-P1, Sony D-8

Offline boojum

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3633
  • Gender: Male
Re: Repairing LiIon used in SD 7xx's
« Reply #2 on: July 23, 2007, 02:49:57 AM »
1800emart sent me an e-mail with an RMA number and said they would send me another as soon as they get mine.  Standup guys so far.   8)
Nov schmoz kapop.

 

RSS | Mobile
Page created in 0.068 seconds with 44 queries.
© 2002-2019 Taperssection.com
Powered by SMF