Become a Site Supporter and Never see Ads again!

Author Topic: Help with an AD1000  (Read 4540 times)

0 Members and 1 Guest are viewing this topic.

Offline Kevin

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1838
  • Gender: Male
    • Company Website (Learn to play by ear or by I.)
Re:Help with an AD1000
« Reply #15 on: November 05, 2003, 06:35:11 PM »
ok so we bought a new 12 pin and I soldered the power cables on and we have power :) but we cant seem to get a signal out of the coax.  The 12 pin we bought is blue unlike the one we replaced which was black (im refering to the back where the solder joints are).  Anyone know which joints we need to connect the coax to?
481(3)>722

Offline Lee

  • Team Bama
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4869
  • Gender: Male
  • "I hate the f***in' eagles, man!"
Re:Help with an AD1000
« Reply #16 on: November 05, 2003, 06:36:03 PM »
I'm pretty sure the pinout is in the manual, which is on apogee's website.

If I have a chance I'll open mine up tonight and look at it.
Denon AVR 3808ci > Paradigm Reference Studio 20 + Velodyne DLS 3750

Offline Kevin

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1838
  • Gender: Male
    • Company Website (Learn to play by ear or by I.)
Re:Help with an AD1000
« Reply #17 on: November 05, 2003, 06:37:45 PM »
preciate lee but we need to finish this project pretty soon for galactic tonight so im going to check out the apogee site, if we dont get it done for some reason I might ask you to check yours if you dont mind :)
481(3)>722

Offline Lee

  • Team Bama
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4869
  • Gender: Male
  • "I hate the f***in' eagles, man!"
Re:Help with an AD1000
« Reply #18 on: November 05, 2003, 06:40:09 PM »
if I can find a tiny screwdriver I'll open it up right now... lemme look
Denon AVR 3808ci > Paradigm Reference Studio 20 + Velodyne DLS 3750

Offline Lee

  • Team Bama
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4869
  • Gender: Male
  • "I hate the f***in' eagles, man!"
Re:Help with an AD1000
« Reply #19 on: November 05, 2003, 06:46:59 PM »
Good thing I opened mine up, it's got a wicked cold solder joint on the S/PDIF out!

On mine (granted it's an AD500 but I'm assuming the 15 pins are the same), the S/PDIF is on pins 1 and 6, with the shield on pin 6 and the center connector on pin 1.

Power is red 15, black 14.

Hope this helps.

-JLW
Denon AVR 3808ci > Paradigm Reference Studio 20 + Velodyne DLS 3750

Offline Kevin

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1838
  • Gender: Male
    • Company Website (Learn to play by ear or by I.)
Re:Help with an AD1000
« Reply #20 on: November 05, 2003, 06:48:16 PM »
SUCCESS!!!!!!!!!!!!!! My first successful solder and a dam good job too!!!! WOOHOOO!! Preciate the help fellas ;) +T to all :)
I feel like making some cables now....hummm...
« Last Edit: November 05, 2003, 06:49:49 PM by Kevin »
481(3)>722

Offline Lee

  • Team Bama
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4869
  • Gender: Male
  • "I hate the f***in' eagles, man!"
Re:Help with an AD1000
« Reply #21 on: November 05, 2003, 06:50:14 PM »
glad to hear it... I'm thinking I might add another S/PDIF out to mine when I repair this solder joint.  I guess I can just run 2 cables off the same pins... anyone see a problem with that?
Denon AVR 3808ci > Paradigm Reference Studio 20 + Velodyne DLS 3750

Offline utahtaper

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 479
Re:Help with an AD1000
« Reply #22 on: November 05, 2003, 09:12:42 PM »
I always cringe at splitting a digital signal. It's not the same as an analog signal. I only do it as a last resort. Hey Kevin, glad you got it working.
Recording:
SKM 140's>LC3>ACM660

Playback:
Tascam DA30MKII DAT player
Jolida Tube CD player

Sota Saphire w/grado TLZ> Melos 333> Melos 400 monoblocks> Legacy Focus

Mcintosh MR71>c22>MC60 monoblocks

Offline Kevin

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1838
  • Gender: Male
    • Company Website (Learn to play by ear or by I.)
Re:Help with an AD1000
« Reply #23 on: November 06, 2003, 08:50:52 AM »
Preciate it ;)
481(3)>722

Offline Lee

  • Team Bama
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4869
  • Gender: Male
  • "I hate the f***in' eagles, man!"
Re:Help with an AD1000
« Reply #24 on: November 06, 2003, 10:42:27 AM »
I always cringe at splitting a digital signal. It's not the same as an analog signal. I only do it as a last resort. Hey Kevin, glad you got it working.

I figure something done at the 15 pin connector would be more stable than a ratshack inline splitter, but I dunno.

I just hate running the sony portables behind decks I don't know how to work (read: DA-P1) and it'd be nice to have 2 chains.
Denon AVR 3808ci > Paradigm Reference Studio 20 + Velodyne DLS 3750

Offline Tim

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 32925
  • Gender: Male
Re:Help with an AD1000
« Reply #25 on: November 06, 2003, 03:39:29 PM »
my 15pin cable had two spdif/rca outs on it when I bought it
I’ve had a few weird experiences and a few close brushes with total weirdness of one sort or another, but nothing that’s really freaked me out or made me feel too awful about it. - Jerry Garcia

Offline Lee

  • Team Bama
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4869
  • Gender: Male
  • "I hate the f***in' eagles, man!"
Re:Help with an AD1000
« Reply #26 on: November 06, 2003, 09:07:26 PM »
you mind cracking it open and seeing how they're wired?  I'm giving you a +T in advance...
Denon AVR 3808ci > Paradigm Reference Studio 20 + Velodyne DLS 3750

Offline Tim

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 32925
  • Gender: Male
Re:Help with an AD1000
« Reply #27 on: November 07, 2003, 07:58:35 PM »
I don't have it anymore, sorry!
I’ve had a few weird experiences and a few close brushes with total weirdness of one sort or another, but nothing that’s really freaked me out or made me feel too awful about it. - Jerry Garcia

 

RSS | Mobile
Page created in 0.195 seconds with 40 queries.
© 2002-2019 Taperssection.com
Powered by SMF