Become a Site Supporter and Never see Ads again!

Author Topic: 48V Phantom XLR to mini 9V adaptor for you plug-in mics  (Read 4353 times)

0 Members and 1 Guest are viewing this topic.

Offline NOLAfishwater

  • is not taping much these days
  • Trade Count: (72)
  • Needs to get out more...
  • *****
  • Posts: 6349
  • Gender: Male
  • I LIKE FISHIN
48V Phantom XLR to mini 9V adaptor for you plug-in mics
« on: September 28, 2007, 02:48:41 PM »
Naiant PFA Phantom Adaptor for Stereo Plug-in Power Microphones, $55

Use any stereo plug-in power microphone with a standard professional microphone preamplifier! Requires phantom power; supplies +9V to plug-in power microphone.



Using the PFA

The PFA is a phantom-power adaptor for plug-in power mics, which enables the mics to be connected to standard professional microphone preamplifiers. The PFA supplies the appropriate voltage to the plug-in power microphones, and provides a balanced, low impedance output to the microphone preamplifier.

The left and right channels of the PFA operate independently, so phantom power must be supplied to both channels for stereo operation.

The PFA supplies +9V across 4.7KΩ resistors to each microphone channel. The PFA requires +24V to +48V phantom power to operate; lower voltages may work with reduced voltage supply to the microphones.


PFA Specifications

Type: phantom power adaptor for plug-in power microphone

Plug-in or Phantom Power: +24V to +48V required
Current: 3mA minimum
Input Impedance: 4.7KΩ
Recommended Preamp Input Impedance: 600Ω minimum
Total Harmonic Distortion, 1kHz @ -10dBV: 0.4%
Total Harmonic Distortion, 1kHz @ -30dBV: <0.05%
Maximum Level, 1kHz @ 1% THD: 0dBV
Frequency Response: 20Hz to 20kHz
Self-Noise: -103dBV
Weight: 2.9oz (83g)
Dimensions (XLR): 2 3/4" x 3/4"ø (70mm x 19mmø)
Dimensions (minijack): 1 3/8" x 3/8"ø (35mm x 9mmø)

order here:
http://www.naiant.com/studiostore/cleverdevices.html

Here are the specs and description:
http://www.naiant.com/pfaspecification.html
« Last Edit: September 28, 2007, 02:50:37 PM by NOLAfishwater »

Offline NOLAfishwater

  • is not taping much these days
  • Trade Count: (72)
  • Needs to get out more...
  • *****
  • Posts: 6349
  • Gender: Male
  • I LIKE FISHIN
Re: 48V Phantom XLR to mini 9V adaptor for you plug-in mics
« Reply #1 on: September 29, 2007, 12:50:08 AM »
anyone use the cables?

Offline NOLAfishwater

  • is not taping much these days
  • Trade Count: (72)
  • Needs to get out more...
  • *****
  • Posts: 6349
  • Gender: Male
  • I LIKE FISHIN
Re: 48V Phantom XLR to mini 9V adaptor for you plug-in mics
« Reply #2 on: October 01, 2007, 09:51:13 AM »
anyone use these?

Offline bugg100

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1014
  • Gender: Male
Re: 48V Phantom XLR to mini 9V adaptor for you plug-in mics
« Reply #3 on: October 01, 2007, 01:33:44 PM »
It is a new product.  Check out the Update from Niant Studios thread. User name mshilarious......  He was offering to float the prototype as loaner fro impressions a few weeks ago. 

Maybe you could jump in and provide the first review?

Joe

Offline NOLAfishwater

  • is not taping much these days
  • Trade Count: (72)
  • Needs to get out more...
  • *****
  • Posts: 6349
  • Gender: Male
  • I LIKE FISHIN
Re: 48V Phantom XLR to mini 9V adaptor for you plug-in mics
« Reply #4 on: October 01, 2007, 02:01:53 PM »
I just ordered a pair. Thanks for the heads up. I didn't even realize that Naiant was already on here. Will give everyone a full report when I run them with CA cards/omnis.

Offline bugg100

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1014
  • Gender: Male
Re: 48V Phantom XLR to mini 9V adaptor for you plug-in mics
« Reply #5 on: October 01, 2007, 02:10:13 PM »
What type of preamp will you run this with?  I have a digimod UA-5 and iriver 140 that this could be sweet with.
+t for for forging new ground....

Offline NOLAfishwater

  • is not taping much these days
  • Trade Count: (72)
  • Needs to get out more...
  • *****
  • Posts: 6349
  • Gender: Male
  • I LIKE FISHIN
Re: 48V Phantom XLR to mini 9V adaptor for you plug-in mics
« Reply #6 on: October 01, 2007, 02:29:17 PM »
Lunatec V3 into a JB3 and maybe soon to be MT2. Will keep everyone posted.

 

RSS | Mobile
Page created in 0.179 seconds with 34 queries.
© 2002-2018 Taperssection.com
Powered by SMF