Become a Site Supporter and Never see Ads again!

Author Topic: 2 DPA 4061 MICRODOTs to 1 minijack stereo 3.5 ?? possible??  (Read 1752 times)

0 Members and 1 Guest are viewing this topic.

Offline chrisv31

  • Trade Count: (3)
  • Taperssection Regular
  • **
  • Posts: 88
  • Gender: Male
2 DPA 4061 MICRODOTs to 1 minijack stereo 3.5 ?? possible??
« on: December 04, 2007, 03:14:58 PM »
I have a set of 2 dpa 4061
i would like to replace the 2 original microdots with 1 minijack 3.5 stereo
if one of you have the solution, that will be very kind

is it possible to have a drawn or the shematic??

Chris
DPA 4061 + MPS 6030 + LS 10 Olympus
NEUMANN KM140 + Neumann BS48i-2

Offline Nick's Picks

  • Trade Count: (33)
  • Needs to get out more...
  • *****
  • Posts: 10216
  • Gender: Male
  • I thought I heard.......
Re: 2 DPA 4061 MICRODOTs to 1 minijack stereo 3.5 ?? possible??
« Reply #1 on: December 05, 2007, 07:56:44 AM »
snip off the ends.

the raw wire has a shield and then a single *very, very thin* conductor inside.  the conductor is the HOT signal.
there is also a lot of fiber built into the wire that you need to remove.
You'll need a good wire stripper.
tiny bathroom type scissors for snipping the fabric away.

do this for each wire.  you now can solder on to your stereo plug.
twist up the two shields together and that becomes the ground.

or...PM me.  I'll do it for you if you dont want to deal w/it. 

Offline Arni99

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 770
  • Gender: Male
Re: 2 DPA 4061 MICRODOTs to 1 minijack stereo 3.5 ?? possible??
« Reply #2 on: December 05, 2007, 08:11:33 AM »
i did it here:
http://taperssection.com/index.php/topic,92042.0.html

but DONĀ“T solder the yellow shielding like i did on the pic HAHA!
the yellow shielding needs to be removed and only the tiny main-conductor has to be soldered..1 to left the other one to thr right solderpoint on the stereo plug.
1st: SONY PCM-M10 + DPA 4060's + DPA MPS 6030 power supply (microdot)
2nd: iPhone 5 + "Rode iXY" microphone/"Zoom IQ5" microphone

Offline chrisv31

  • Trade Count: (3)
  • Taperssection Regular
  • **
  • Posts: 88
  • Gender: Male
Re: 2 DPA 4061 MICRODOTs to 1 minijack stereo 3.5 ?? possible??
« Reply #3 on: December 06, 2007, 03:38:36 PM »
thanks for your help

DPA 4061 + MPS 6030 + LS 10 Olympus
NEUMANN KM140 + Neumann BS48i-2

 

RSS | Mobile
Page created in 0.072 seconds with 45 queries.
© 2002-2019 Taperssection.com
Powered by SMF