Topic: studio projects lsd2..?

[dnsacks]

for mid side, Doug Oade suggested to me a while back that the top capsule should be used for the mid (forward pointing card) and the bottom cap be used for side (sideways pointing figure .

Doug opined that since the space above the top cap is open, it could provide a more open/full sound.

fwiw

[shruggy1987]

for mid side, Doug Oade suggested to me a while back that the top capsule should be used for the mid (forward pointing card) and the bottom cap be used for side (sideways pointing figure .

Doug opined that since the space above the top cap is open, it could provide a more open/full sound.

fwiw

that makes sense.

 i have listened to about 10 recording made with these mics and i must say, they have all impressed me; the railroad earth recording that i linked before is probably in my top 10 favorite audience recordings .  i'll go for a V3 first, though.  i've got to take some more time to figure out what equipment is ahead for me. 

[Chanher]

channer-
when you get the m1290's, compare them to the lsd2.  i currently have 1290s and would see the lsd2 as an upgrade. 
what shockmount is used with the lsd2?

i looked up the lsd2 on archive and got this incredible RRE recording.  great imaging.
http://www.archive.org/audio/etree-details-db.php?id=28545

will do.

[shruggy1987]

thanks!

when you get the m1290s, i think you will notice that they have a VERY bright high end, almost too much at times.  Excellent midtones, especially guitar.

[Nick's Picks]

fwiw..
the right channel is always the side signal.  that is what all the software expects when you decode it