Become a Site Supporter and Never see Ads again!

Author Topic: Studio Projects LSD2 fluffing  (Read 29172 times)

0 Members and 1 Guest are viewing this topic.

Offline Bdifr78

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1865
  • Gender: Male
Re: Studio Projects LSD2 fluffing
« Reply #30 on: April 06, 2006, 07:33:12 PM »
Well I will be taping from the section tomorrow night at 930 club.  About 35" back and about 10' LOC.  So if it is intended only for up close taping, my recording should sound like crap.
Neumann KM140s>Bumblebee MIAGI-II XLRs>Lunatec V3>SD722

BobW

  • Guest
  • Trade Count: (0)
Re: Studio Projects LSD2 fluffing
« Reply #31 on: April 06, 2006, 09:03:50 PM »
Well I will be taping from the section tomorrow night at 930 club.  About 35" back and about 10' LOC.  So if it is intended only for up close taping, my recording should sound like crap.

No,  35' should sound very natural and transparent with the LSD2  You'll basically get what you hear, for the most part.
If you would use hypers in a particular setting, set the caps X-Y@ 70 degrees

I have actually used the basscut both on the mic as well as on the FR-2, but never together.
These babies are pretty flat down to 30hz and do exhibit proximity efffect, although X-Y seems to limit it .

The basscut has saved me in boomy rooms with bass-heavy mixes.

Offline Bdifr78

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1865
  • Gender: Male
Re: Studio Projects LSD2 fluffing
« Reply #32 on: April 06, 2006, 10:14:46 PM »
Well I will be taping from the section tomorrow night at 930 club.  About 35" back and about 10' LOC.  So if it is intended only for up close taping, my recording should sound like crap.

No,  35' should sound very natural and transparent with the LSD2  You'll basically get what you hear, for the most part.
If you would use hypers in a particular setting, set the caps X-Y@ 70 degrees

I have actually used the basscut both on the mic as well as on the FR-2, but never together.
These babies are pretty flat down to 30hz and do exhibit proximity efffect, although X-Y seems to limit it .

The basscut has saved me in boomy rooms with bass-heavy mixes.

Sweet thanks for the knowlege.  Another question, from the section I described earlier, would M/S or blumlein be out of the question?  The sound in 930 is almost always really good for a club, really good.
Neumann KM140s>Bumblebee MIAGI-II XLRs>Lunatec V3>SD722

Offline Nick's Picks

  • Trade Count: (33)
  • Needs to get out more...
  • *****
  • Posts: 10260
  • Gender: Male
  • I thought I heard.......
Re: Studio Projects LSD2 fluffing
« Reply #33 on: April 07, 2006, 07:10:47 AM »
out of the question?
who knows.  try a set one way and then another and then you'll really know next time.

BobW

  • Guest
  • Trade Count: (0)
Re: Studio Projects LSD2 fluffing
« Reply #34 on: April 07, 2006, 07:46:05 AM »
I'd guess the question really is all about how much true stereo information can be gained in a deep room with a mono PA.
First blush, I'd say very little, but there are many variables.
Nick is right on.  With guerilla tapage, the only way to know what works is to try it.
The worst that could happen with a M+S run that had limited side is that you'd have a mono recording.
The best is that you can eliminate noise and echoes with the turn of a knob on the plug-in.

The Voxengo M+S Plug (free):

http://www.voxengo.com/product/msed/

Offline Bdifr78

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1865
  • Gender: Male
Re: Studio Projects LSD2 fluffing
« Reply #35 on: April 07, 2006, 09:13:13 AM »
out of the question?
who knows.  try a set one way and then another and then you'll really know next time.


Cool.  It's a late night show doors at 10pm, so I doubt there is a second set.  God I hope there isn't a second set, I work at 9am tomorrow.  I think I am just gonna try one and see how it comes out.  After all the main reason I am going to this show tonight, besides seeing Karl D, is to try out the LSD2!
Neumann KM140s>Bumblebee MIAGI-II XLRs>Lunatec V3>SD722

Offline halleyscomet8

  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 5557
  • Gender: Male
Re: Studio Projects LSD2 fluffing
« Reply #36 on: April 07, 2006, 12:51:48 PM »
2 sets is my guess. 11:00>12:15 set 1, 12:40>2:00 set 2

i think they have been doing two sets this whole tour. is there a opener?
my shows on the archive: http://www.archive.org/bookmarks/halleyscomet8
And, yes, I know I suck about getting stuff circulated.  ;)

Offline Chanher

  • Trade Count: (2)
  • Taperssection All-Star
  • ****
  • Posts: 1381
  • Colorado Crew
Re: Studio Projects LSD2 fluffing
« Reply #37 on: April 07, 2006, 01:04:27 PM »
jeremy, i just saw a thread that reminded me of this, please do a test record of the omni mode. Certain lsd2's have been known to emit a high-pitched ring while in omni mode. the good news is that the fix is so easy, even electronics-challenged people can do it. I never used the omni setting, so I don't know if it's requires the fix, but I wouldn't want you to ruin a recording!
Line Audio CM4 / AT853Rx (c,h) / Studio Projects C4 MKII (c,h,o)
Sound Devices MP-2 / bm2p+ Edirol UA-5
Zoom F3 / F6 / Marantz Oade Warm Mod PMD661 / Tascam DR-70D

Offline Bdifr78

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1865
  • Gender: Male
Re: Studio Projects LSD2 fluffing
« Reply #38 on: April 07, 2006, 01:39:59 PM »
2 sets is my guess. 11:00>12:15 set 1, 12:40>2:00 set 2

i think they have been doing two sets this whole tour. is there a opener?

There is an opener.  I have never seen one of these late door shows at 930 have 2 sets.
Neumann KM140s>Bumblebee MIAGI-II XLRs>Lunatec V3>SD722

Offline §†∑∫åµÞ≥¥

  • You can call me Steve.
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 7105
  • Gender: Male
Re: Studio Projects LSD2 fluffing
« Reply #39 on: April 11, 2006, 01:54:57 PM »
just curious what people are running behind their LSD2 (other than a V3)? any mod UA-5 users out there?
"Absurdity is the only reality." - FZ

LMA recordings
www.nutritionbulk.com

Offline Nick's Picks

  • Trade Count: (33)
  • Needs to get out more...
  • *****
  • Posts: 10260
  • Gender: Male
  • I thought I heard.......
Re: Studio Projects LSD2 fluffing
« Reply #40 on: April 11, 2006, 02:24:54 PM »
yup.
T+ (as opposed to +T :) )
Jason Adler runs this as well.  sounds sick.

Offline bhtoque

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 3308
  • Gender: Male
  • So much music, so little time.
Re: Studio Projects LSD2 fluffing
« Reply #41 on: April 11, 2006, 04:07:54 PM »
yup.
T+ (as opposed to +T :) )
Jason Adler runs this as well.  sounds sick.

Finally the student becomes the master.  ;D

It only took about 5 years of me wishing I had your rig for you to start running what I was running.

JAson
MG 200/210/270
AKG c422>s42>Hydra silver interconnects
AKG 391/92/93>MK 90/3 actives
>AM Hyper-Conductors
Studio Projects LSD2>MiAGi II
>Edirol R-4 (Oade T Mod)

db.etree.org/bhtoque

Offline Nick's Picks

  • Trade Count: (33)
  • Needs to get out more...
  • *****
  • Posts: 10260
  • Gender: Male
  • I thought I heard.......
Re: Studio Projects LSD2 fluffing
« Reply #42 on: April 11, 2006, 04:42:21 PM »
well, there's always next month....

Offline bhtoque

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 3308
  • Gender: Male
  • So much music, so little time.
Re: Studio Projects LSD2 fluffing
« Reply #43 on: April 11, 2006, 08:12:36 PM »
well, there's always next month....


[cough]SLUT[/cough]  ;D

JAson
MG 200/210/270
AKG c422>s42>Hydra silver interconnects
AKG 391/92/93>MK 90/3 actives
>AM Hyper-Conductors
Studio Projects LSD2>MiAGi II
>Edirol R-4 (Oade T Mod)

db.etree.org/bhtoque

Offline OOK

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 2727
  • Gender: Male
  • formerly OtherOneK
Re: Studio Projects LSD2 fluffing
« Reply #44 on: April 11, 2006, 09:09:44 PM »
Well I will be taping from the section tomorrow night at 930 club.  About 35" back and about 10' LOC.  So if it is intended only for up close taping, my recording should sound like crap.


So I was wondering, how did it turn out........?
DPA/HEB 4060's > R09HR
MBHO648/KA100Lk/KA200/KA300/KA500 > SD702

 

RSS | Mobile
Page created in 0.154 seconds with 40 queries.
© 2002-2024 Taperssection.com
Powered by SMF