Become a Site Supporter and Never see Ads again!

Author Topic: Idea for VMS (& other 12v m-tip reverse polarity gear)  (Read 13504 times)

0 Members and 1 Guest are viewing this topic.

Offline noahbickart

  • phishrabbi
  • Site Supporter
  • Trade Count: (33)
  • Needs to get out more...
  • *
  • Posts: 2554
  • Gender: Male
  • So now I wander over grounds of light...
Re: Idea for VMS (& other 12v m-tip reverse polarity gear)
« Reply #15 on: March 15, 2019, 08:49:05 AM »
Here's another version:

https://roka-berlin.de/products/power-supply-connectors/power-supply-plug-overmolded-on-cable/?lang=en

it seems like the important term is "overmolded" and "45323"
Recording:
Capsules: Schoeps mk41v (x2), mk22 (x2), mk3 (x2), mk21 & mk8
Cables: 2x nbob KCY, 1 pair nbob actives, GAKables 10' & 20' 6-channel snakes, Darktrain 2 & 4 channel KCY and mini xlr extensions:
Preamps:    Schoeps VMS 02iub, Naiant IPA, Sound Devices Mixpre6 I
Recorders: Sound Devices Mixpre6 I, Sony PCM m10

Home Playback: Mac Mini> Mytek Brooklyn+> McIntosh MC162> Eminent Tech LFT-16; Musical Fidelity xCan v2> Hifiman HE-4XX / Beyerdynamic DT880

Office Playback: iMac> Grace m903> AKG k701 / Hifiman HE-400

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9849
  • Gender: Male
    • shows ive taped  that are in circulation
Re: Idea for VMS (& other 12v m-tip reverse polarity gear)
« Reply #16 on: April 06, 2019, 12:50:27 PM »
I think this is the key...... Schoeps DC Connector tip.

The M-tip adapter will power the VMS but it will not be a rock solid connection and slightest bump to the cable is likely to disrupt DC power temporarily.

So a perfect world solution might be to hack off the M-tip on that adapter and replace it with Schoeps' proprietary connector. From what I can see all Schoeps did was to add a rubber donut ring to the end of a M-tip to get it to seat correctly into the VMS' DC power pin on the front of the box.

The problem is that Redding says they don’t have any more of the tips.

i believe i got a couple somewhere. i ordered a few at one point and they only had one, and sent me that and put the rest of my oder down as backordered. months later i got a couple more in the mail and they refunded me for the 1-2 they didnt send me that i had originally ordered

Offline dactylus

  • Site Supporter
  • Trade Count: (62)
  • Needs to get out more...
  • *
  • Posts: 5987
  • Gender: Male
  • Maplewood, MN
Re: Idea for VMS (& other 12v m-tip reverse polarity gear)
« Reply #17 on: April 06, 2019, 01:02:04 PM »
I think this is the key...... Schoeps DC Connector tip.

The M-tip adapter will power the VMS but it will not be a rock solid connection and slightest bump to the cable is likely to disrupt DC power temporarily.

So a perfect world solution might be to hack off the M-tip on that adapter and replace it with Schoeps' proprietary connector. From what I can see all Schoeps did was to add a rubber donut ring to the end of a M-tip to get it to seat correctly into the VMS' DC power pin on the front of the box.

The problem is that Redding says they don’t have any more of the tips.

i believe i got a couple somewhere. i ordered a few at one point and they only had one, and sent me that and put the rest of my oder down as backordered. months later i got a couple more in the mail and they refunded me for the 1-2 they didnt send me that i had originally ordered

^
Sent you a PM Dustin...
hot licks > microphones > recorder



...ball of confusion, that's what the world is today, hey hey...

Offline jbell

  • TDS
  • Trade Count: (149)
  • Needs to get out more...
  • *****
  • Posts: 4530
  • Gender: Male
  • Spreadicated
Re: Idea for VMS (& other 12v m-tip reverse polarity gear)
« Reply #18 on: April 06, 2019, 02:33:51 PM »
I had a cable with one of the schoeps tips that I almost gave away since it sat in the YS so long.  Can't remember who eventually bought it. 
Mics: DPA ST4011ER & 4018ER
Preamps: DPA MMA 6000 | Audioroot Femto
Recorders: Sound Devices Mixpre-10 II | Sony PCM A10

-22        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

Offline noahbickart

  • phishrabbi
  • Site Supporter
  • Trade Count: (33)
  • Needs to get out more...
  • *
  • Posts: 2554
  • Gender: Male
  • So now I wander over grounds of light...
Re: Idea for VMS (& other 12v m-tip reverse polarity gear)
« Reply #19 on: April 07, 2019, 08:32:13 AM »
I think this is the key...... Schoeps DC Connector tip.

The M-tip adapter will power the VMS but it will not be a rock solid connection and slightest bump to the cable is likely to disrupt DC power temporarily.

So a perfect world solution might be to hack off the M-tip on that adapter and replace it with Schoeps' proprietary connector. From what I can see all Schoeps did was to add a rubber donut ring to the end of a M-tip to get it to seat correctly into the VMS' DC power pin on the front of the box.

The problem is that Redding says they don’t have any more of the tips.

i believe i got a couple somewhere. i ordered a few at one point and they only had one, and sent me that and put the rest of my oder down as backordered. months later i got a couple more in the mail and they refunded me for the 1-2 they didnt send me that i had originally ordered

I’ll gladly one if you have an extra....
Recording:
Capsules: Schoeps mk41v (x2), mk22 (x2), mk3 (x2), mk21 & mk8
Cables: 2x nbob KCY, 1 pair nbob actives, GAKables 10' & 20' 6-channel snakes, Darktrain 2 & 4 channel KCY and mini xlr extensions:
Preamps:    Schoeps VMS 02iub, Naiant IPA, Sound Devices Mixpre6 I
Recorders: Sound Devices Mixpre6 I, Sony PCM m10

Home Playback: Mac Mini> Mytek Brooklyn+> McIntosh MC162> Eminent Tech LFT-16; Musical Fidelity xCan v2> Hifiman HE-4XX / Beyerdynamic DT880

Office Playback: iMac> Grace m903> AKG k701 / Hifiman HE-400

Offline kleiner Rainer

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 137
  • Gender: Male
Re: Idea for VMS (& other 12v m-tip reverse polarity gear)
« Reply #20 on: April 07, 2019, 01:17:52 PM »
Newark sells a compatible connector:

https://www.newark.com/lumberg/nes-1-g/plug-low-voltage-1-95mm/dp/97K6463?st=nes%201

Made by Lumberg, this connector is called NES 1 G. There is a plastic shroud around the barrel, but I suppose this can be cut away or if I read the drawing correct, it should slide into the casing. Even here in Germany they are a rare sight nowadays, most DC plugs and jacks are 5.5/2.1 or 5.5/2.5

Hope that helps.

Rainer
recording steam trains since 1985

Offline noahbickart

  • phishrabbi
  • Site Supporter
  • Trade Count: (33)
  • Needs to get out more...
  • *
  • Posts: 2554
  • Gender: Male
  • So now I wander over grounds of light...
Re: Idea for VMS (& other 12v m-tip reverse polarity gear)
« Reply #21 on: April 08, 2019, 01:51:43 PM »
Newark sells a compatible connector:

https://www.newark.com/lumberg/nes-1-g/plug-low-voltage-1-95mm/dp/97K6463?st=nes%201

Made by Lumberg, this connector is called NES 1 G. There is a plastic shroud around the barrel, but I suppose this can be cut away or if I read the drawing correct, it should slide into the casing. Even here in Germany they are a rare sight nowadays, most DC plugs and jacks are 5.5/2.1 or 5.5/2.5

Hope that helps.

Rainer

Thanks. I've ordered a few of these and I'll report back.
Recording:
Capsules: Schoeps mk41v (x2), mk22 (x2), mk3 (x2), mk21 & mk8
Cables: 2x nbob KCY, 1 pair nbob actives, GAKables 10' & 20' 6-channel snakes, Darktrain 2 & 4 channel KCY and mini xlr extensions:
Preamps:    Schoeps VMS 02iub, Naiant IPA, Sound Devices Mixpre6 I
Recorders: Sound Devices Mixpre6 I, Sony PCM m10

Home Playback: Mac Mini> Mytek Brooklyn+> McIntosh MC162> Eminent Tech LFT-16; Musical Fidelity xCan v2> Hifiman HE-4XX / Beyerdynamic DT880

Office Playback: iMac> Grace m903> AKG k701 / Hifiman HE-400

Offline noahbickart

  • phishrabbi
  • Site Supporter
  • Trade Count: (33)
  • Needs to get out more...
  • *
  • Posts: 2554
  • Gender: Male
  • So now I wander over grounds of light...
Re: Idea for VMS (& other 12v m-tip reverse polarity gear)
« Reply #22 on: September 01, 2021, 08:14:31 PM »
I finally did this. Works perfectly.
Recording:
Capsules: Schoeps mk41v (x2), mk22 (x2), mk3 (x2), mk21 & mk8
Cables: 2x nbob KCY, 1 pair nbob actives, GAKables 10' & 20' 6-channel snakes, Darktrain 2 & 4 channel KCY and mini xlr extensions:
Preamps:    Schoeps VMS 02iub, Naiant IPA, Sound Devices Mixpre6 I
Recorders: Sound Devices Mixpre6 I, Sony PCM m10

Home Playback: Mac Mini> Mytek Brooklyn+> McIntosh MC162> Eminent Tech LFT-16; Musical Fidelity xCan v2> Hifiman HE-4XX / Beyerdynamic DT880

Office Playback: iMac> Grace m903> AKG k701 / Hifiman HE-400

Offline rocksuitcase

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 8176
  • Gender: Male
    • RockSuitcase: stage photography
Re: Idea for VMS (& other 12v m-tip reverse polarity gear)
« Reply #23 on: September 02, 2021, 10:44:05 AM »
sweetness. Good job!
music IS love

When you get confused, listen to the music play!

Mics:         AKG460|CK61|CK1|CK3|CK8|Beyer M 201E|DPA 4060 SK
Recorders:Marantz PMD661 OADE Concert mod; Tascam DR680 MKI x2; Sony PCM-M10

Offline noahbickart

  • phishrabbi
  • Site Supporter
  • Trade Count: (33)
  • Needs to get out more...
  • *
  • Posts: 2554
  • Gender: Male
  • So now I wander over grounds of light...
Re: Idea for VMS (& other 12v m-tip reverse polarity gear)
« Reply #24 on: September 02, 2021, 06:12:07 PM »
I’ve got extra tips if anyone else needs one.
Recording:
Capsules: Schoeps mk41v (x2), mk22 (x2), mk3 (x2), mk21 & mk8
Cables: 2x nbob KCY, 1 pair nbob actives, GAKables 10' & 20' 6-channel snakes, Darktrain 2 & 4 channel KCY and mini xlr extensions:
Preamps:    Schoeps VMS 02iub, Naiant IPA, Sound Devices Mixpre6 I
Recorders: Sound Devices Mixpre6 I, Sony PCM m10

Home Playback: Mac Mini> Mytek Brooklyn+> McIntosh MC162> Eminent Tech LFT-16; Musical Fidelity xCan v2> Hifiman HE-4XX / Beyerdynamic DT880

Office Playback: iMac> Grace m903> AKG k701 / Hifiman HE-400

Offline todd e

  • Trade Count: (3)
  • Needs to get out more...
  • Posts: 3513
  • Gender: Male
  • ***Team Schoeps***
Re: Idea for VMS (& other 12v m-tip reverse polarity gear)
« Reply #25 on: August 07, 2023, 01:51:13 PM »
id love one if you are selling still?

 

RSS | Mobile
Page created in 0.073 seconds with 33 queries.
© 2002-2023 Taperssection.com
Powered by SMF