Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: Jerseyboy on December 31, 2016, 12:22:24 PM
-
I'm seeking the correct setup/connection for my AT853s when going into an Edirol r09hr & Tascam D40. I have a general idea, but I'd rather get experienced instructions when using these mics. I have the adapter cables for each input.
Thanks in advance!
jb
-
I am guessing you want a set up like this:
(http://taperssection.com/index.php?action=dlattach;topic=171728.0;attach=116744;image)
Contact ted and he can most likely make yer mics look just like these ---> taperssection.com/index.php?topic=171728.msg2127159#msg2127159 or give you whatever instruction you require to do it yerself.
-
I have everything pictured with the exception of the mic stand cradles. I need detailed hook up info. Such as do I use 48v phantom power on the d40, pip on the r09hr etc. Can these mics run straight in without a pre-amp?
Thanks for your reply.
jb
also iso- at853 hyper & Omni caps
-
They will run either way, mic-in depending on what voltage your deck provides. I run mine almost always with the phantom adapters(providing I can get them in the venue), and Naiant TinyBox. They can really handle high SPL's with p48 phantom power.