« Reply #5 on: April 02, 2005, 12:33:21 AM »
Don't think they need much. Mine is covered on all sides except for the top.
-Kevin
Dear Kevin,
Nice pic. But I just noticed your "Input monitor" setting is at full. This should be turned down, right? At least it is turned down on my self-mod UA5. According to dklein, monitor on adds another, very slightly delayed, signal to the output of the UA5.
By the way, does line out on the UA5 depend on the main output volume? I think it does but I'm not sure. I was trying to use a minidisc in pause record as a level meter. Actually I'm using the remote (RM-40 something) since it shows rec levels and has a nice backlight. I plug the minidisc into the UA5 line out and set the record level on the MD to 20/30. Seems to work.
Richard
Logged
Mics: Sennheiser MKE2002 (dummy head), Studio Projects C4, AT825 (unmodded), AT822 franken mic (x2), AT853(hc,c,sc,o), Senn. MKE2, Senn MKE40, Shure MX183/5, CA Cards, homebrew Panasonic and Transsound capsules.
Pre/ADC: Presonus Firepod & Firebox, DMIC20(x2), UA5(poorly-modded, AD8620+AD8512opamps), VX440
Recorders: Edirol R4, R09, IBM X24 laptop, NJB3(x2), HiMD(x2), MD(1).
** This individual has moved to user "illconditioned" **