Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: F.O.Bean on June 01, 2011, 12:20:12 AM
-
8)
-
8)
-
Run line-in in high SPL situations, but you'll likely need to run mic-in for soft stuff to get enough gain.
-
Run line-in in high SPL situations, but you'll likely need to run mic-in for soft stuff to get enough gain.
OK, thanks man :)
-
The M10's mic input can handle a pretty hot signal (guysonic measured it at +2 dBu). With those mics, you'll have no problem going mic-in...
-
The M10's mic input can handle a pretty hot signal (guysonic measured it at +2 dBu). With those mics, you'll have no problem going mic-in...
Thanks Aaron :)
-
^^^ No problem! I haven't seen a sensitivity spec for the CA-14s, but if you assume it is similar to other small cards, you'll be able to handle very high SPL (at 8 mV/Pa, for example, you'd be at 136 dBSPL before your mics were outputting 2 dBu)...